[UPDATED 2023] 1z0-1091-22 dumps Free Test Engine Verified By Certified Experts [Q18-Q39]

[UPDATED 2023] 1z0-1091-22 dumps Free Test Engine Verified By Certified Experts

Realistic 1z0-1091-22 Accurate & Verified Answers As Experienced in the Actual Test!

NEW QUESTION # 18
What are the THREE uses of the Smart Grid Gateway (SGG)?

A. Sharing outage information with outage management systems
B. Sharing customer information
C. Sharing event information with downstream systems
D. Communicating directly with meters
E. Connecting to Smart Meter systems

Answer: A,C,E

Explanation:
Explanation
The Smart Grid Gateway (SGG) is a middleware component that provides integration between Oracle Utilities Meter Data Management and smart meter systems. The SGG has three main uses:
* Sharing event information with downstream systems: The SGG can process events from smart meter systems and send them to downstream systems, such as customer information systems (CIS), outage management systems (OMS), ordistribution management systems (DMS). Events are occurrences that happen on devices or networks, such as tampering, low battery, or power outage.
* Connecting to Smart Meter systems: The SGG can communicate with smart meter systems using various protocols and adapters. The SGG can support multiple smart meter systems simultaneously and provide a common interface for Oracle Utilities Meter Data Management.
* Sharing outage information with outage management systems: The SGG can process outage events from smart meter systems and send them to outage management systems for analysis and restoration. Outage events are events that indicate a loss or restoration of power on a device or network.
The SGG does not share customer information or communicate directly with meters. Customer information is managed by Oracle Utilities Customer Cloud Service or Oracle Utilities Customer Care and Billing.
Communication with meters is handled by smart meter systems that connect to the SGG.

NEW QUESTION # 19
Which THREE features should you set up in the Cloud Service Payload Processing configuration?

A. File system directory SFTP setup
B. Head-end systems (HES)
C. Object Storage locations
D. Key rings and key pairs

Answer: A,C,D

Explanation:
Explanation
To set up the Cloud Service Payload Processing configuration, you should perform the following steps:
* File system directory SFTP setup: This is used to configure the secure file transfer protocol (SFTP) settings for transferring files between Oracle Utilities Smart Grid Gateway and Oracle Utilities Meter Data Management. You need to specify the SFTP host name, port number, user name, password, and directory path for inbound and outbound files.
* Key rings and key pairs: This is used to configure the encryption and decryption settings for payload files. You need to create key rings and key pairs for each communication type and associate them with message senders and receivers.
* Object Storage locations: This is used to configure the object storage settings for storing payload files in Oracle Cloud Infrastructure. You need to specify the object storage URL, bucket name, user name, password, and encryption key for each communication type.
You do not need to set up head-end systems (HES), which are external systems that communicate with smart meters and devices. Head-end systems are configured in Oracle Utilities Smart Grid Gateway, not in Oracle Utilities Meter Data Management.

NEW QUESTION # 20
Which THREE tasks would you perform when configuring the application to generate service investigative orders for revenue protection?

A. Set up VEE rules to look for low usage.
B. Configure service task type to look far Validation, Estimation, and Editing (VEE) exceptions, device events, and failed commands.
C. Tune the AI engine to look for theft by using theft algorithms.
Configure case management.
D. Import device events related to theft.

Answer: A,B,D

Explanation:
Explanation
To configure the application to generate service investigative orders for revenue protection, you should perform the following tasks:
* Set up VEE rules to look for low usage: VEE rules are used to validate, estimate, and edit measurements based on certain criteria. You can set up VEE rules to look for low usage patterns that may indicate theft or meter malfunction.
* Configure service task type to look for Validation, Estimation, and Editing (VEE) exceptions, device events, and failed commands: Service task types are used todefine the types of work that need to be performed on devices or service points. You can configure service task types to look for VEE exceptions, device events, and failed commands that may indicate theft or meter malfunction. You can also configure service task types to trigger service orders when these conditions are met.
* Import device events related to theft: Device events are occurrences that happen on devices, such as tampering, reverse energy flow, or magnetic interference. You can import device events related to theft from smart meter systems using the Smart Grid Gateway or other integration methods.
You do not need to tune the AI engine to look for theft by using theft algorithms or configure case management. These are features of Oracle Utilities Revenue Protection Cloud Service, which is a separate product from Oracle Utilities Meter Data Management.

NEW QUESTION # 21
Usage transactions can contain date breaks. What is used to supply date breaks?

A. Deferred monitor calculation algorithm
B. Usage subscription type
C. Usage subscription BO
D. Requesting system or user input

Answer: D

Explanation:
Explanation
Usage transactions can contain date breaks, which are dates that divide a usage period into sub-periods based on certain criteria or events. Date breaks are used to supply datebreaks for usage transactions. Date breaks are specified by the requesting system or user input when requesting a usage transaction. A requesting system is an external system or service provider that requests bill determinants from MDM. A user input is a manual entry of data by a user.
Usage subscription BO is not used to supply date breaks for usage transactions. A usage subscription BO is a business object that defines the relationship between a service point and a subscribing system.
Usage subscription type is not used to supply date breaks for usage transactions. A usage subscription type is a configuration that defines the properties and rules for a usage subscription.
Deferred monitor calculation algorithm is not used to supply date breaks for usage transactions. A deferred monitor calculation algorithm is a custom logic that can be developed by using Groovy scripting language or Java programming language. A deferred monitor calculation algorithm is used to perform certain calculations or validations on usage transactions after they are created.

NEW QUESTION # 22
You want to create Smart Grid Gateway (SGG) Payload Processing extendable lookup values. Which Groovy Library Method would you configure in the User Exit Interceptors section?

A. Get Parser and Get Transformer
B. SOAPSNDRand RTHTTPSNDR
C. Initial Measurements and Device
D. Events Set Parser and Set Transformer

Answer: D

Explanation:
Explanation
To create Smart Grid Gateway Payload Processing extendable lookup values, you should configure the Events Set Parser and Set Transformer methods in the User Exit Interceptors section. These methods are used to parse and transform event data from payload files into a common format that can be processed by Oracle Utilities Meter Data Management.
You do not need to configure Get Parser and Get Transformer methods, which are used to parse and transform measurement data from payload files. You do not need to configure SOAPSNDR and RTHTTPSNDR methods, which are used to send SOAP or HTTP messages to external systems. You do not need to configure Initial Measurements and Device methods, which are used to initialize measurement data and device information from payload files.

NEW QUESTION # 23
Which step should you perform to configure commands in a SaaS environment?

A. Create key rings and key pairs.
B. Create Object Storage locations (or buckets).
C. Configure the following processing methods: Unit of Measure (UOM) Translation, Initial Measurement Creation, and Device Event Mapping.
D. Configure outbound and inbound communications (Request/Response model).
E. Configure File Storage Configuration (Fl-RleStorage) extendable lookup.

Answer: B

NEW QUESTION # 24
Which TWO functions can the service point-measurement cycle relationship of Meter Data Management (MDM) perform?

A. Initiate request of bill determinants from subscribing systems.
B. Initiate push of bill determinants ta subscribing systems.
C. Create hand-held download read activities.
D. Create optimal meter reader routes by measurement cycle.

Answer: A,B

Explanation:
Explanation
The service point-measurement cycle relationship of Meter Data Management (MDM) can perform the following functions:
* Initiate request of bill determinants from subscribing systems: A subscribing system is an external system or service provider that receives bill determinants from MDM. A bill determinant is a value that is used to calculate a bill for a service point or device. The service point-measurement cycle relationship can initiate a request of bill determinants from subscribing systems based on the measurement cycle schedule. A measurement cycle schedule defines the dates on which devices are scheduled to be read for a given measurement cycle. A measurement cycle defines the schedule for manual meter reading of devices at service points in that cycle.
* Initiate push of bill determinants to subscribing systems: The service point-measurement cycle relationship can also initiate a push of bill determinants to subscribing systems based on the measurement cycle schedule. This means that MDM can send bill determinants to subscribing systems automatically or on demand.
The service point-measurement cycle relationship cannot perform the following functions:
* Create optimal meter reader routes by measurement cycle: A meter reader route is a sequence of service points or devices that are assigned to a meter reader formanual meter reading. A meter reader route is not created by the service point-measurement cycle relationship, but by using other configurations, such as route type or route sequence.
* Create hand-held download read activities: A hand-held download read activity is an activity that downloads measurement data from a hand-held device to MDM. A hand-held download read activity is not created by the service point-measurement cycle relationship, but by using other configurations, such as activity type or activity status.

NEW QUESTION # 25
A business needs a new Service Order process that includes meter commands. Which THREE options should you configure to build this process?

A. Device configuration type
B. Measuring component type
C. Communication type Message sender
D. Activity type

Answer: B,C,D

Explanation:
Explanation
To build a new Service Order process that includes meter commands, you need to configure the following options:
* Measuring component type: This defines the type of measurement that a device can record, such as scalar, interval, or event. You can associate meter commands with measuring component types to perform actions on devices that have those types1.
* Activity type: This defines the type of work that needs to be performed on a service point or device, such as installation, removal, or inspection. You can associate meter commands with activity types to trigger actions on devices when an activity is completed1.
* Communication type Message sender: This defines the communication channel and protocol that is used to send meter commands to devices. You can configure message senders for different communication types, such as AMI, AMR, or manual1.
You do not need to configure device configuration type, which defines the physical characteristics and attributes of a device, such as manufacturer, model, or serial number1. Device configuration type does not affect meter commands.

NEW QUESTION # 26
A new fast food restaurant is being installed at the center of a university. The restaurant will be metered, but its usage will also be included in the university's master meter.
What should you do to bill the university correctly?

A. Exclude the restaurant's usage from customer information system (CIS).
B. Set up a virtual meter to exclude the restaurant's usage from the master meter.
C. Configure the restaurant's service point on the university's usage subscription to exclude the restaurant's usage.
D. Use derivation algorithms to exclude the restaurant's usage from the master meter.

Answer: D

Explanation:
Explanation
A virtual meter is a meter that does not physically exist but is used to represent the usage of a group of meters or a portion of a meter. A virtual meter can be used to perform various calculations or adjustments on usage data, such as aggregation, derivation, allocation, or net metering. According to the Oracle Utilities Meter Data Management Business User Guide, to bill the university correctly for a new fast food restaurant that is being installed at the center of the university and whose usage will also be included in the university's master meter, the correct step is:
* Use derivation algorithms to exclude the restaurant's usage from the master meter. This can be done by creating a virtual meter that represents the master meter minus the restaurant's meter and applying a derivation algorithm that subtracts the restaurant's usage from the master meter's usage. The virtual meter's usage can then be used for billing the university.
References: Oracle Utilities Meter Data Management Business User Guide, Chapter 3: Asset Management, Section 3.4: Virtual Meters

NEW QUESTION # 27
A business needs a new Service Order process that includes meter commands. Which THREE options should you configure to build this process?

A. Device configuration type
B. Measuring component type
C. Communication type Message sender
D. Activity type

Answer: B,C,D

NEW QUESTION # 28
In which THREE situations would you use a dynamic option?

A. An option is specified on a service point to allow Validation, Estimation, and Editing (VEE) processing to dynamically invoke a group of VEE rules depending on a characteristic.
B. A consumer receives credit for consumption during a critical peak period (CPP) event that is lower than their "normal* consumption.
C. The scalar meter-read download process creates an activity each time a scalar measuring component is scheduled to be read.
D. The utility has a program where customers can optionally participate in demand response (DR) programs.
E. The utility has a program that credits customers for conservation during critical peak periods.

Answer: A,D,E

Explanation:
Explanation
A dynamic option is an option that is assigned to an entity at run time based on a characteristic value. Dynamic options are used to provide flexibility and customization for different scenarios. According to the Oracle Utilities Meter Solution Cloud Service Business User Guide, some examples of dynamic options are:
* The utility has a program where customers can optionally participate in demand response (DR) programs. A dynamic option is specified on a usage subscription to allow different DR programs to be applied depending on a characteristic value such as customer class or rate schedule.
* An option is specified on a service point to allow Validation, Estimation, and Editing (VEE) processing to dynamically invoke a group of VEE rules depending on a characteristic. For example, if the service point has a characteristic indicating that it is part of a net metering program, then a different set of VEE rules may be applied than for a regular service point.
* The utility has a program that credits customers for conservation during critical peak periods. A dynamic option is specified on a usage subscription to allow different credit calculations to be applied
* depending on a characteristic value such as customer class or rate schedule.
References: Oracle Utilities Meter Solution Cloud Service Business User Guide, Chapter 2: Options and Characteristics, Section 2.1: Options

NEW QUESTION # 29
Why would you use an eligibility criteria in usage subscription?

A. To configure an optional validation group within a usage subscription.
B. To configure an optional usage calculation rule within a usage calculation group for the usage.
C. To determine whether a usage subscription generates a usage transaction.
D. To configure an optional usage group within a usage subscription.

Answer: C

Explanation:
Explanation
A usage subscription is a record that defines how usage data are collected, processed, and exported for a service point or a device. A usage subscription can have various components that specify the logic and parameters for performing various operations on usage data, such as validation, estimation, editing, calculation, or export. According to the Oracle Utilities Meter Data Management Business User Guide, one example of a component that can be configured in a usage subscription is:
* Eligibility criteria: These are rules that determine whether a usage subscription generates a usage transaction or not. A usage transaction is a record that contains usage data that are ready for export to other systems, such as customer information system (CIS) or settlement system. Eligibility criteria can be used to filter out usage subscriptions that do not meet certain conditions or requirements for generating usage transactions.
References: Oracle Utilities Meter Data Management Business User Guide, Chapter 8: Usage, Section 8.1:
Usage Subscriptions

NEW QUESTION # 30
You need to set up a configuration that allows service points to be used with various meters. This configuration should support interval, time of use, and scalar devices.
How would you meet this requirement?

A. Configure one service point type and three device types, and then configure the three valid device types on the service point type.
B. Configure one service point, three devices, and set any one of the three devices to be related to the service point as required by the data scenarios.
C. Configure three service points and set any one of the three devices to be related to the service point as required by the data scenarios.
D. Configure one service paint, one device, and three measuring components to be related to the service point as required by the data scenarios.

Answer: D

Explanation:
Explanation
A service point is a record that represents a physical location where a utility provides service to a customer. A service point can have one or more devices associated with it to measure the usage of the service. A device is a record that represents a physical meter or other equipment that records usage data. A device can have one or more measuring components associated with it to represent different types of usage data, such as interval, time of use, or scalar. According to the Oracle Utilities Meter Data Management Business User Guide, to set up a configuration that allows service points to be used with various meters and support interval, time of use, and scalar devices, one way to meet this requirement is:
* Configure one service point, one device, and three measuring components to be related to the service point as required by the data scenarios. This can be done by creating a service point record and associating it with a device record that represents the meter. Then, creating three measuring component records that represent different types of usage data (interval, time of use, and scalar) andassociating them with the device record. Depending on the data scenarios, different measuring components can be used to collect and process usage data for the service point.
References: Oracle Utilities Meter Data Management Business User Guide, Chapter 3: Asset Management, Section 3.1: Service Points; Section 3.3: Devices; Section 3.5: Measuring Components

NEW QUESTION # 31
If a project is setting up meter commands with a head-end system (HES), which TWO components should you configure to support the inbound responses from HES?

A. Outbound message type
B. Master configurations
C. Inbound web services
D. Message sender

Answer: C,D

Explanation:
Explanation
Smart Grid Gateway (SGG) is a product that provides integration between Oracle Utilities Meter Data Management and various head-end systems that communicate with smart meters. SGG supports inbound and outbound communication between the two systems using web services and message queues. According to the Oracle Utilities Smart Grid Gateway User Guide, if a project is setting up meter commands with a head-end system (HES), two components that should be configured to support the inbound responses from HES are:
* Inbound web services: These are web services that are exposed by SGG to receive messages from HES.
Inbound web services can be used to receive responses from HES for commands that were sent by SGG or other systems.
* Message sender: This is a component that sends messages from SGG to other systems using message queues. Message sender can be used to send responses from HES to Oracle Utilities Meter Data Management or other systems.
References: Oracle Utilities Smart Grid Gateway User Guide, Chapter 2: Architecture Overview; Chapter 3:
Communication; Chapter 4: Commands

NEW QUESTION # 32
When used with the SaaS Cloud services, the Oracle Smart Grid Gateway (SGG) adapters process usage and device event payloads via batch processing. Files are sent from a head-end system (HES) to an Oracle Cloud Object Storage location, where they are batch processed.
Which THREE operations are performed by the SGG processes?

A. Invoke IMD/Device Event Seeder (as appropriate).
B. Transform usage readings into standard (unified) format.
C. Load reads into Object Storage.
D. Parse payload into individual usage readings/device events.
E. Load reads into a file directory.

Answer: A,B,D

Explanation:
Explanation
In a SaaS environment, Oracle Utilities Meter Data Management and Smart Grid Gateway are deployed on Oracle Cloud Infrastructure (OCI) and use OCI Object Storage to store files and data. OCI Object Storage is a scalable and secure service that allows users to store and access data from anywhere using REST APIs or web consoles. Smart Grid Gateway adapters process usage and device event payloads via batch processing. Files are sent from a head-end system (HES) to an OCI Object Storage location, where they are batch processed.
According to the Oracle Utilities Smart Grid Gateway User Guide, some operations that are performed by the Smart Grid Gateway processes are:
* Parse payload into individual usage readings/device events. This is an operation that extracts usage readings or device events from the payload file and converts them into individual records.
* Invoke IMD/Device Event Seeder (as appropriate). This is an operation that invokes a web service that sends usage readings or device events to Oracle Utilities Meter Data Management for further processing.
* Transform usage readings into standard (unified) format. This is an operation that converts usage readings from vendor-specific formats into a standard format that can be processed by Oracle Utilities Meter Data Management.
References: Oracle Utilities Smart Grid Gateway User Guide, Chapter 4: Commands, Section 4.4: Command Configuration; Chapter 5: Device Events; Chapter 6: Usage

NEW QUESTION # 33
Service Order Management is used to orchestrate service order processes such as Enable Service and Disable Service.
Which Oracle Utilities Application Framework (OUAF) admin data should be created for a custom Service Order Management process?

A. Consumer contract type
B. Device type
C. Activity type
D. Device event type

Answer: C

Explanation:
Explanation
An activity type is an Oracle Utilities Application Framework (OUAF) admin data that should be created for a custom Service Order Management process. An activity type defines the type of work that needs to be performed on a service point or device, such as enable service or disable service. An activity type also defines the following attributes:
* The status and priority of the activity
* The business object and algorithm that are used to process the activity
* The fields and validations that are required for the activity
* The notifications and escalations that are triggered by the activity
* The dependencies and relationships that exist between different activities An activity type is used to create and manage service orders, which are records that store the details and outcomes of the work performed on a service point or device.

NEW QUESTION # 34
Oracle Utilities Meter Data Management (MDM) DataConnect facilitates extraction of data for use in external applications such as energy management systems.
Which TWO can you export in the MDM version of DataConnect?

A. Usage measurement data
B. Configuration data
C. Billing determinants
D. Device events
E. Service points and install events

Answer: A,C

Explanation:
Explanation
Oracle Utilities Meter Data Management (MDM) DataConnect is a feature that facilitates extraction of data for use in external applications such as energy management systems. According to the Oracle Utilities Meter Data Management Business User Guide, some examples of data that can be exported in the MDM version of DataConnect are:
* Billing determinants: These are usage data that have been divided into time-of-use periods and applied with factors for billing purposes. Billing determinants can be exported to a billing system or a customer information system for generating bills or invoices.
* Usage measurement data: These are raw or processed interval data that have been recorded by smart meters or other devices. Usage measurement data can be exported to an analytics system or a demand response system for analysis or optimization.
References: Oracle Utilities Meter Data Management Business User Guide, Chapter 9: Communications, Section 9.4: DataConnect

NEW QUESTION # 35
A small building with five metered apartments has common areas used by all residents. The common areas are metered separately, and the common usage needs to be spread evenly across residents.
How should you configure the solution to bill each resident accurately?

A. Use a derivation algorithm to include 20% of the common areas with the apartment accounts.
B. Set up a virtual meter to include the apartment usage and 20% of the common areas.
C. Each apartment's usage subscriptions must have two service paints, one for the apartment and one for
20% of the common areas.
D. Calculate the usage for each apartment by using customer information system (CIS).

Answer: B

Explanation:
Explanation
To configure the solution to bill each resident accurately for a small building with five metered apartments and common areas, you should set up a virtual meter to include the apartment usage and 20% of the common areas. A virtual meter is a configuration that defines how measurements from multiple devices or service points are aggregated or disaggregated. A virtual meter can be used to create new measurements from existing ones based on certain rules or factors. By setting up a virtual meter to include the apartment usage and 20% of the common areas, you can ensure that each resident is billed for their own usage and their share of the common usage.
You do not need to set up each apartment's usage subscriptions to have two service points, one for the apartment and one for 20% of the common areas. A usage subscription is a relationship that defines the external system or service provider that will receive the bill determinants, the usage calculation group that will be used to calculate the bill determinants, and the service points that will provide the measurement data for the bill determinants. A usage subscription can have only one service point, not two.
You do not need to calculate the usage for each apartment by using customer information system (CIS), which is an external system that manages customer accounts and billing information. CIS does not calculate usage for each apartment, but receives bill determinants from MDM.
You do not need to use a derivation algorithm to include 20% of the common areas with the apartment accounts, which is a custom logic that can be developed by using Groovy scripting language or Java programming language. A derivation algorithm is not used to create new measurements from existing ones, but to create new measuring components from existing ones.

NEW QUESTION # 36
Your client wants to generate bill determinants for the billing system by using a time-of-use (TOU) group for
"on peak", "off peak", and "shoulder." They also want to have holiday consumption categorized as "off peak" regardless of the day on which it falls.
What is the correct configuration for this?

A. Add the work calendar to the TOU map template and set the Holiday TOU as "off peak".
B. Add the work calendar ta the TOU map template.
C. Add the work calendar to the TOU map template and set the Holiday TOU as "on peak", "off peak", or
"shoulder" depending on the calendar day.
D. Add the work calendar to the TOU map template and set the Holiday TOU as "on peak".
E. Edit the TOU map template to include the Holiday TOU as "off peak".

Answer: A

Explanation:
Explanation
A time-of-use (TOU) group is a set of TOU maps that define how usage is divided into different TOU periods for different days of the week and seasons of the year. A TOU group can have a work calendar associated with it to define holidays and other special days that may have different TOU periods than regular days. According to the Oracle Utilities Meter Solution Cloud Service Business User Guide, to configure a TOU group for"on peak", "off peak", and "shoulder" periods and have holiday consumption categorized as "off peak" regardless of the day on which it falls, the correct steps are:
* Add the work calendar to the TOU map template and set the Holiday TOU as "off peak". This will ensure that any day marked as a holiday in the work calendar will have its usage assigned to the "off peak" period.
* Create a TOU map for each season using the TOU map template and define the start and end times for each TOU period ("on peak", "off peak", and "shoulder") for each day of the week.
* Create a TOU group and add the TOU maps for each season to it.
References: Oracle Utilities Meter Solution Cloud Service Business User Guide, Chapter 4: Time-of-Use Data Management, Section 4.2: Time-of-Use Maps; Section 4.3: Time-of-Use Groups

NEW QUESTION # 37
In the SaaS solution, how should you configure equipment that attaches to an asset, such as a communication module attached to a meter?

A. Create a master child asset
B. Set up a component
C. Add a sub-asset
D. Add a constituent part

Answer: B

Explanation:
Explanation
To configure equipment that attaches to an asset, such as a communication module attached to a meter, you should set up a component. A component is a part of an asset that can be installed and removed independently of the asset. You can define component types and associate them with asset types. For example, you can define a communication module component type and associate it with a meter asset type2.
You do not need to create a master child asset, which is a relationship between two assets that are installed at different service points but are functionally related. For example, you can define a transformer as a master asset and a meter as a child asset2. A master child asset is not suitable for equipment that attaches to an asset.
You do not need to add a sub-asset, which is an asset that is installed at the same service point as another asset but has its own measuring components and usage subscriptions. For example, you can define a meter as a sub-asset of another meter if they share the same service point but have different measurements2. A sub-asset is not suitable for equipment that attaches to an asset.
You do not need to add a constituent part, which is an attribute of an asset that cannot be installed or removed independently of the asset. For example, you can define a battery as a constituent part of a meter if it is embedded in the meter and cannot be replaced . A constituent part is not suitable for equipment that attaches to an asset.

NEW QUESTION # 38
Which TWO Validation, Estimation, and Editing (VEE) rules are typically configured on a project for consumption synchronization processes?

A. Sum check: Ensure the two measuring components are in sync.
B. Interval adjustment from scalar: Adjust the interval curve to the register consumption.
C. Unit of Measure (UOM) check: Ensure UOMs are correct.
D. Low check: Check for invalid low usage.

Answer: A,B

Explanation:
Explanation
Consumption synchronization is a process that ensures that the usage data from different measuring components (such as interval and scalar) are consistent and aligned. Consumption synchronization can be performed using various methods, such as adjustment, estimation, or derivation. According to the Oracle Utilities Meter Data Management Business User Guide, two types of VEE rules that are typically configured on a project for consumption synchronization processes are:
* Interval adjustment from scalar: This is a rule that adjusts the interval curve to match the register consumption. Interval adjustment from scalar can be used to correct any discrepancies between interval and scalar usage data due to factors such as clock drift or multiplier errors.
* Sum check: This is a rule that ensures that the usage data from two measuring components are in sync.
Sum check can be used to compare the usage data from different measuring components (such as import and export) and flag any differences or errors.
References: Oracle Utilities Meter Data Management Business User Guide, Chapter 8: Usage, Section 8.3:
Validation, Estimation, and Editing; Section 8.5: Consumption Synchronization

NEW QUESTION # 39
......

Latest Oracle 1z0-1091-22 Practice Test Questions: https://www.prep4king.com/1z0-1091-22-exam-prep-material.html

Jul-2023 Pass Oracle 1z0-1091-22 Exam in First Attempt Easily: https://drive.google.com/open?id=1M_9uxqEB3KsmitoLBsFPhXizoi6IEFzu

[UPDATED 2023] 1z0-1091-22 dumps Free Test Engine Verified By Certified Experts [Q18-Q39]

Related Blogs

Latest Update

Useful Links

Contact Us