Pass Oracle 1z0-1075-20 exam questions - convert Test Engine to PDF
Pass Your 1z0-1075-20 Exam Easily - Real 1z0-1075-20 Practice Dump Updated Dec 03, 2021
NEW QUESTION 33
Which two steps should you use to create a new Oracle Transactional Business Intelligence report in the Manufacturing Cloud?
- A. Use Business Intelligence answers to create the report.
- B. Use ibots to create the report.
- C. Use the Manufacturing subject area to select the report columns and create the report.
- D. Use Business Intelligence publisher to create a template and use that template to create the report.
Answer: A,D
Explanation:
Explanation
You can use Oracle Transactional Business Intelligence to create analysis and Oracle Business Intelligence Publisher to create reports.
NEW QUESTION 34
You are monitoring the production status on your shop floor. The production operator informs you that a particular resource that was not functioning for the past week is now back in operation.
Which option shows the steps to quickly release the work orders affected by this operation, which were put on hold using the mobile application?
- A. Select the infotile On Hold> Select a work order you want to release> Select the work order operation on hold > Swipe left on the work order name> Tap or click the Release action, and click OK
- B. Select the infotile On Hold> Select a work order you want to release> Swipe left on the work order name> Tap or click the Release action, and click OK
- C. Select the infertile Dispatch List> Select a work order operation you want to release> Swipe left on the work order name> Tap or click the Release action, and click OK
- D. Select the infotile Unreleased> Select a work order you want to release>Swipe left on the work order name> Tap or click the Release action, and click OK
Answer: C
NEW QUESTION 35
A plant runs 24x7 daily using three continuous shifts of 8 hours each. One unit of an equipment resource R1 is assigned to each of the three shifts. On a specific work order, the resource R1 is required to work for 2 hours. The resource is set up with an efficiency of 50% and utilization of 100%. R1 is scheduled to start on the given work order at noon.
What time will R1 be scheduled to finish, assuming no calendar exceptions have been set?
- A. 2:00 PM
- B. 8:00 PM
- C. 4:00 PM
- D. 1:00 PM
- E. 12:30 PM
Answer: C
NEW QUESTION 36
Identify the three changes that are allowed to be made to active Work Definition in a Work Center, without creating a new version.
- A. Add an Operation
- B. Costing Priority
- C. Delete an Operation
- D. Completion Subinventory
- E. Production Priority
Answer: A,D,E
NEW QUESTION 37
Your customer runs two daily shifts in her plant: Morning Shift and Evening Shift. A resource LATHE is assigned to the work center W1. There are five units of LATHE available, of which three units are available for the Morning Shift and the remaining units are available for the Evening Shits.
Which two actions must you perform to associate LATHE with W1?
- A. Do not select the Available 24 Hours check box and in the Resource Availability region, enter 40% against the resource LATHE in the Evening Shift column.
- B. Do not select the Available 24 Hours check box and in the Resource Availability region, enter 3 against the resource LATHE in the Morning Shift column.
- C. Do not select the Available 24 Hours check box and in the Resource Availability region, enter 60% against the resource LATHE in the Morning Shift column.
- D. Do not select the Available 24 Hours check box and in the Resource Availability region, enter 2 against the resource LATHE in the Evening Shift column.
- E. Select the Available 24 Hours check box and in the Resource Availability region, enter 2 against the resource LATHE in the Evening Shift column.
- F. Select the Available 24 Hours check box and in the Resource Availability region, enter 3 against the resource LATHE in the Morning Shift column.
Answer: C,F
NEW QUESTION 38
A Production Supervisor queries a Work Order (WO-1025) from the manage Work Orders page. On the Entering Edit Work Order: WO-1025 page, he finds General Information, Operations and History tab, but not the Reservations tab.
Identify the two reasons that can cause the Reservations tab not to be displayed.
- A. Work Order (WO-1025) is not a Configured item Work Order.
- B. Work Order (WO-1025) is not a Drop-Ship Work Order.
- C. Work Order (WO-1025) is not a Back-to-Back Work Order.
- D. Work Order (WO-1025) is not a Pick-to-order Work Order.
- E. Work Order (WO-1025) is not a Plan-to-produce Work Order.
Answer: A,B
NEW QUESTION 39
The Manufacturing Engineer, responsible for creating and maintaining the Work Definitions, has scheduled the Process Item Structure Changes to Work Definitions program. However, after the execution of the program the engineer did not receive a notification with the details of the Item Structure changes.
Which two reasons could cause this?
- A. The engineer does not have Data access to Item Structures.
- B. The engineer does not have the Manage Work Definitions function privilege.
- C. The engineer does not have Data access to Items Attributes.
- D. The engineer does not have Data access to Items.
- E. The engineer does not have Data access to Manufacturing plant in which the Item Structure change was performed.
Answer: B,E
NEW QUESTION 40
The Cost Accountant has reported to the Production Supervisor that the Work Order transactions are not getting transferred to Costing.
Identify the reason for work order transactions not getting transferred to Costing.
- A. The item was made inactive after the Work Order transaction.
- B. The Costing Interfaced Attribute is not enabled in the resource definition.
- C. The Costing Interfaced Attribute is enabled in the resource definition.
- D. The Manage Item Rules setup is not complete.
Answer: B
NEW QUESTION 41
Your customer has the following business requirement. There are two work definitions created in the application. One Work Definition for Engine Finished Good and other Work Definition for Pallet Finished Good. The Engine Finished Good item should have Pallet Finished Goods as one of its component.
Identify the way to establish the relationship between Pallet and Engine Work Definitions.
- A. Create a Subinventory that could be the completion Subinventory for yielding the pallet and then the same Subinventory can serve as the supply Subinventory of the pallet in the Work Definition created for Engine.
- B. The two Work Definitions can be tied through Project or Seiban numbers.
- C. The Work Definition versions can be used to tie the Work Orders.
- D. Assign a higher priority to the Work Definition created for Engine and a lower one for the Work Definition for Pallet.
Answer: C
NEW QUESTION 42
A production Operator is executing work order in your plant. After completing move transactions, he notices that he has performed some incorrect move operations, including incorrect scrap and reject transactions. He is required to perform a reverse transaction to correct the errors. The operations are not count point enabled and not auto charged.
Identify the four transactions to correct this situation.
- A. Reverse the product at the last operation.
- B. Reverse at an operation.
- C. Reverse material issued to a work order.
- D. Reverse from reject to ready.
- E. Reverse resources charged to a work order.
- F. Reverse from scrap to ready.
Answer: C,D,E,F
NEW QUESTION 43
An order entry specialist creates a Back-to-Back order for product item with an intention of fulfilling by in-house manufacturing. The fulfillment line is scheduled and Supply Chain Orchestration (SCO) has initiated creation of a Supply Order rather than Work Order.
Identify two options that can cause this situation.
- A. Sourcing rules for the product item are defined as Make as well as Transfer.
- B. Sourcing rules for the product item are defined as Buy as well as Transfer.
- C. Sourcing rule for the product item is defined as Buy.
- D. Sourcing rule for the product item is defined as Make, but Work Definition is not defined.
Answer: A,D
NEW QUESTION 44
You are reviewing the production status of your manufacturing plant shop floor as a production supervisor.
Your production manager wants a report on a work order status which is reserved against a particular customer. The final assembly of the work order is serialized.
Which option shows the steps to complete the task using the mobile application?
- A. Search the work order by customer name to open the work order details page> Click Actions and select the E-mail icon> Select required work orders> Select the e-mail client, enter the recipient's e-mail, and click Send.
- B. Use your mobile camera to scan the bar coded serial number of the final assembly> Upload the barcode to open the work order details page > Click Actions and select the E-mail icon> Select required work orders> Select the e-mail client, enter the recipient's e-mail, and click Send.
- C. Select the infotile Customer to open the work order details page> Click Actions and select the E-mail icon> Select required work orders>Select the e-mail client, enter the recipient's e-mail, and click Send.
- D. Use your mobile camera to scan the bar coded serial number of the final assembly> Upload the barcode to open the work order details page> Select required work orders> Click Social icon (OSN) > Select recipient, and click Share.
Answer: B
NEW QUESTION 45
Your Customer has implemented Oracle Cloud Manufacturing and the Manufacturing user is in the process of defining Work Definition and Operations. However, this user is unable to assign an ad hoc item, Grease, to an operation.
Identify the reason.
- A. The user doesn't have access to the PIM module.
- B. An item cannot be assigned on an ad hoc basis.
- C. The user doesn't have Data access to create item structure.
- D. The user doesn't have Override Item Structure Components in the Work Definition privileges.
Answer: B
NEW QUESTION 46
Your customer wants to mass create and modify Work Definitions and the relevant operation, items, and resources available in the spreadsheet.
Which two operations are not supported using ADFDI (Oracle Application Development Framework Desktop Integration)?
- A. Create Work Definitions
- B. Populate Descriptive flexfields
- C. Create and update ATO (Assemble To Order) model work definitions
- D. Update Work Definitions
Answer: B,C
NEW QUESTION 47
The Manufacturing plant has two 8-hour shifts for the work center WC1: Day Shift and Night Shift. You associate four units each for resources R1, R2, R3, and R4 to the work center WC1. The customer wants to assign all units of resource R2 available for Day and Night Shift.
Identify the correct sequence of steps to achieve this requirement.
- A. Associate Resource R2 with Work Center WC1> Select the Available 24 Hours check box> Resource Availability region> Enter 2 in Day Shift Column > Enter 2 in Night Shift Column.
- B. Associate Resource R2 with Work Center WC1> Deselect the Available 24 Hours check box> Resource Availability region> Enter 2 in Day Shift Column> Enter 2 in Night Shift Column
- C. Associate Resource R2 with Work Center WC1> Deselect the Available 24 Hours check box> Resource Availability region> Enter 4 in Day Shift Column> Enter 4 in Night Shift Column.
- D. Associate Resource R2 with Work Center WC1> Select Available 24 Hours check box> Resource Availability region> Enter 4 in Day Shift Column> Enter 4 in Night Shift Column.
Answer: A
NEW QUESTION 48
Identify four parameters that are considered in the calculation of manufacturing lead time in Oracle Manufacturing Cloud.
- A. Resource calendars of the work centers involved
- B. Resource calendar exceptions
- C. The shifts are defined in the plant calendar
- D. Plant calendar exceptions
- E. The primary work definition of the item
- F. The lot size of the item
Answer: B,C,E,F
NEW QUESTION 49
In a manufacturing plant, two purchase components P1 and P2 and a resource R1 are required to assemble a product. The cost of the assembly is calculated by using the standard costing method. The work definition and resource rates of the assembly have been defined as required.
A cost accountant is estimating cost of the assembly, analyzing rolled-up costs before finally publishing estimates as frozen standards to cost accounting by using a cost planning scenario. While reviewing rolled up costs, the extended costs of purchase components are not included in a rolled-up scenario.
Identify the reason.
- A. Purchase components P1 and P2 are not associated with Material cost plan of the cost planning scenario.
- B. Create Accounting Distributions was not initiated.
- C. Create Accounting was not initiated.
- D. Costs for purchase components P1 and P2 are not defined in cost accounting.
Answer: B
NEW QUESTION 50
Identify three types of Item Quantities displayed in the Work Order History tab.
- A. Scrapped Quantity
- B. In Process Quantity
- C. Completed Quantity
- D. Remaining Quantity
- E. Total Quantity
Answer: A,C,D
NEW QUESTION 51
Planning Central has collected manufacturing data for a Work Order WO-2045 (Make Item AS1000), where actual duration of work order is 2 days. Item AS1000 manufacturing lead time is 1.25 days.
A plan is run and the Work Order WO-2045 is rescheduled.
Identify the duration of the rescheduled Work Order WO- 2045.
- A. Rescheduled Work Order WO-2045 duration = 3.25days
- B. Rescheduled Work Order WO-2045 duration = 1.25 days
- C. Rescheduled Work Order WO-2045 duration = 0.75 days
- D. Rescheduled Work Order WO-2045 duration = 2 days
Answer: C
NEW QUESTION 52
In a Manufacturing Cloud post production support environment, a user wants to update some of the operations in the work orders by using the Midpoint Scheduling feature. However, the user is unable to update any of the orders.
Identify two reasons.
- A. The operations are missing sequence.
- B. The scheduled resources are not part of the organization selected by the user.
- C. None of the operations include scheduled resources.
- D. The work order operations do not have operations start or completion date.
Answer: A,C
NEW QUESTION 53
Identify two conditions that should be met at the same time for a Standard Operation to be called an Optional Operation.
- A. The Count Point check box is deselected.
- B. There are no components attached to it.
- C. The Automatically Transact check box is deselected.
- D. The Count Point check is selected.
- E. The Automatically Transact check box is selected.
Answer: A,C
NEW QUESTION 54
While creating an item in Product Information Management (PIM), the following two item templates are selected in sequence and applied.
1. Template: Finished Goods (WIP = No, Customer Ordered = Yes)
2. Template: Sub-assembly (WIP = Yes, Customer Ordered = No)
Identify the Item Attribute values in the application.
- A. WIP = Yes, Customer Ordered = Yes
- B. WIP = Yes, Customer Ordered = No
- C. WIP = No, Customer Ordered = No
- D. WIP = No, Customer Ordered = Yes
Answer: D
NEW QUESTION 55
You want to use a predefined Standard Operation in a Work Definition, but you also want to change the usage of the Standard Operation resource. Identify the setup required.
- A. Use a Resource exception for the resource and alter its usage.
- B. Deselect the Referenced check box while adding the standard operation to the work definition and change the usage manually.
- C. Use the Transfer and Edit Standard Operation functionality to edit the resource usage.
- D. Select the Referenced check box while adding the standard operation to the work definition and change the usage manually.
Answer: D
NEW QUESTION 56
In your customer's manufacturing facility, different types of Movement Requests are created. Key manufacturing components are issued to the work orders form the manufacturing subinventory. The manufacturing subinventory receives its supplies form the Warehouse subinventory through automatically created Movement Requests.
Which type of Movement Requests should you use to fill the manufacturing subinventory form the Warehouse subinventory?
- A. Batch Wave Movement Requests
- B. Requisition Movement Requests
- C. Replenishment Requests
- D. Pick Wave Movement Requests
Answer: B
NEW QUESTION 57
In what three ways can you set the overcompletion tolerance for a subcomponent yield, so the job order can report the excess production completion?
- A. Overcompletion Tolerance Type = Percentage, value > 0
- B. Overcompletion Tolerance Type = Amount, value > 0
- C. Overcompletion Tolerance Type = Amount, value = 0
- D. Overcompletion Tolerance Type = Percentage, value = 0
- E. Overcompletion Tolerance Type = Percentage, value = 100
Answer: A,C,D
NEW QUESTION 58
......
1z0-1075-20 Real Exam Questions and Answers FREE: https://www.prep4king.com/1z0-1075-20-exam-prep-material.html
