Latest NS0-183 Actual Free Exam Questions Updated 145 Questions [Q55-Q70]

Latest NS0-183 Actual Free Exam Questions Updated 145 Questions

Free NS0-183 Exam Braindumps certification guide Q&A

Network Appliance NS0-183 Exam Syllabus Topics:

Topic	Details
Topic 1	Demonstrate knowledge of how to configure/verify configuration requirements Describe installation preparation steps
Topic 2	Identify the networking components in a cluster environment Identify general cluster terms used during installation
Topic 3	Demonstrate knowledge of the purpose of the management network Identify the functions of supported switches
Topic 4	Demonstrate knowledge of handoff procedures to the customer Describe the cluster network, e.g., multi-node, single node clusters
Topic 5	Identify contacts for additional help after handoff Identify ONTAP licensing for 9.7
Topic 6	Demonstrate knowledge of how a node should be added or replaced Describe basic equipment installation steps
Topic 7	Demonstrate knowledge of how to communicate completion and possible problem status Basic Installation Topics and Tools
Topic 8	Describe how to use NetApp configurations Describe how to complete the service report

NetApp NS0-183 Exam Certification Details:

Number of Questions	60
Exam Name	Storage Installation Engineer ONTAP
Exam Price	$150 USD
Exam Code	NS0-183 NCSIE
Sample Questions	NetApp NS0-183 Sample Questions
Exam Registration	PEARSON VUE
Recommended Training	ONTAP Clustered Installation Workshop (ILT) ONTAP Cluster Administration (vILT/ILT) Universal FAS Installation (WBT) Introduction to NetApp Installation Standard (WBT)
Duration	90 minutes
Passing Score	67%

 

NEW QUESTION 55
A customer has a current AFF ASA A700 cluster and they want to expand the cluster by adding a second AFF ASA A700 HA pair.
In this scenario, which step would be required to accomplish this task?

• A. Install a BES-53248 cluster switch and convert the AFF ASA A700 from a switchless to switch cluster.
• B. Enable ALUA between the two HA pairs to allow cluster backend traffic.
• C. The customer will need to create a separate cluster for the second AFF ASA A700 pair.
• D. Install a Brocade FC switch and create zoning between the original cluster and the new cluster.

Answer: A

 

NEW QUESTION 56
You have an AFF All SAN Array (ASA) cluster that is running ONTAP 9.7. The cluster is configured for Active Directory domain controller access using a domain tunnel.
In this scenario, which two licenses are enabled on the cluster? (Choose two.)

• A. FCP
• B. CIFS
• C. iSCSI
• D. NVMe

Answer: A,B

 

NEW QUESTION 57
You want to create a new intercluster LIF for cross-cluster replication and use the CLI. After you create the nac101_intercluster_lif_icl LIF, you are not able to see the LIF in the list of local intercluster LIFs.

Referring to the exhibit, what is the problem?

• A. The LIF that was created has the wrong role type.
• B. The home node of the new intercluster LIF has reached the maximum of four intercluster LIFs.
• C. The intercluster LIF has assigned an IP address that is not in the intercluster VLAN.
• D. The assigned port for the intercluster e1c LIF is in the down admin state.

Answer: A

 

NEW QUESTION 58
You have installed and configured a new AFF C190 cluster with ONTAP 9.7. Your customer wants you to install the latest version of ONTAP.
In this scenario, what are two methods to update ONTAP? (Choose two.)

• A. Use a USB drive with the new software image and let ONTAP automatically boot.
• B. Use ONTAP System Manager to download and install the new software image.
• C. Use ONTAP System Manager to upload and install the new software image.
• D. Use the cluster image package get and cluster image update commands.

Answer: B,D

 

NEW QUESTION 59
Which tool allows you to create a new FlexGroup volume?

• A. OnCommand Unified Manager
• B. OnCommand System Manager
• C. NetAppDocs
• D. Cluster Config Builder

Answer: B

 

NEW QUESTION 60
Your customer wants a newly installed AFF C190 cluster to send SNMP notifications to a trap host called OVERWATCH01.
In this scenario, which two statements are correct? (Choose two.)

• A. Configure DNS on the cluster.
• B. Configure a firewall policy and allow SNMP.
• C. Configure an SNMP community string on the cluster.
• D. Configure a trap host on the cluster.

Answer: A,D

 

NEW QUESTION 61
You just installed two nodes into an existing ONTAP cluster.

When running date on the CLI you notice that the cluster1-03 node is running behind time. You confirmed that you can reach the node management LIF of each node.
Referring to the exhibit, which statement is true?

• A. No NTP server is configured for this node.
• B. The NTP is adjusting in small increments.
• C. The DNS is not configured for this node.
• D. The node-management LIF has to be on e0M for NTP to work.

Answer: C

 

NEW QUESTION 62
Which three components are required when setting up a new ONTAP cluster? (Choose three.)

• A. Advanced Drive Partitioning
• B. password
• C. node management IP
• D. cluster management IP
• E. intercluster IP

Answer: C,D,E

 

NEW QUESTION 63
Click the Exhibit button.

Referring to the exhibit, what information is forwarded to syslog after you enter the scripted install commands? (Choose two.)

• A. AutoSupport messages
• B. command history
• C. SNMP traps
• D. EMS messages

Answer: A,B

Explanation:
Explanation/Reference: https://www.netapp.com/media/10674-tr4569.pdf

 

NEW QUESTION 64
Click the Exhibit button.

Your ONTAP cluster shows the cluster network errors that are shown in the event log. What is used by ONTAP software to log the errors that are shown in the exhibit?

• A. EMS
• B. SNMP
• C. BGP
• D. AutoSupport

Answer: A

 

NEW QUESTION 65
A customer has a 6-node AFF A700 cluster and wants to add four nodes without having to update license functionality for each node manually. In this scenario, which type of license provides this functionality?

• A. Evaluation License
• B. Standard License
• C. Demo License
• D. Site License

Answer: D

 

NEW QUESTION 66
Before starting a base installation on an AFF A400, you need to find out the default cluster interconnect ports for the AFF A400 controllers.
In this scenario, which three resources would you use to find this information? (Choose three.)

• A. Active IQ Unified Manager
• B. hardware installation setup poster
• C. AFF FAS Documentation Center
• D. Hardware Universe (HWU)
• E. Interoperability Matrix Tool (IMT)

Answer: B,C,D

 

NEW QUESTION 67
You have to disable a switch that is connected to a port on your FAS2750. You notice that the LIFs that are associated with this port are migrated to a port that is not expected.
In this scenario, what would cause this behavior?

• A. The broadcast domain is configured incorrectly.
• B. The network port is configured incorrectly.
• C. The network failover port is not licensed.
• D. There are no online ports within the same failover group.

Answer: A

 

NEW QUESTION 68
While installing a new AFF A400 HA pair, you are unable to add an NTP server from another subnet. You are able to ping the NTP server from the new cluster.
In this scenario, what are two causes of this problem? (Choose two.)

• A. The time skew is too great.
• B. A firewall is blocking port 123.
• C. The cluster management LIF needs to be in a different IPspace.
• D. The admin SVM has the wrong gateway.

Answer: C,D

 

NEW QUESTION 69
What are two reason why automatic giveback fails? (Choose two.)

• A. NFS sessions are established.
• B. SAN sessions are established.
• C. The disk shelf is too hot.
• D. Storage failover is disabled.

Answer: C,D

 

NEW QUESTION 70
......

NS0-183 Certification Overview Latest NS0-183 PDF Dumps: https://www.prep4king.com/NS0-183-exam-prep-material.html