Get instant access to NS0-520 Practice Tests 2021 Free Updated Today!
Welcome to download the newest PassLeader NS0-520 PDF dumps ( 60 Q&As)
NEW QUESTION 31
Click the Exhibit button.
The storage system reports that one or more of the FC LIFs have the administratively up and operationally down status. Initiators are unable to connect to the affected LIFs or access LUNs that are presented by those LIFs.
Referring to the exhibit, which command fields provide port login details with the switch?
- A. media-type
- B. conn-established
- C. status-extended
- D. fabric-established
Answer: D
NEW QUESTION 32
Click the Exhibit button.
Referring to the exhibit, which two Fibre Channel names should you zone on the FC switch to provide connectivity to the LUN? (Choose two.)
- A. 50:0a:09:82:9c:16:cc:00
- B. 20:00:00:50:56:9c:16:cc
- C. 50:0a:09:82:9c:7a:4e:00
- D. 20:01:00:50:56:9c:16:cc
Answer: B,D
NEW QUESTION 33
An administrator is testing a newly deployed SAN configuration and wants to simulate a node failure by administratively taking all FC physical ports down on a node that is serving data.
In this scenario, what should the administrator observe?
- A. ANA path states change to use the direct paths of the HA partner to serve data.
- B. ALUA path states change to use the direct paths of the HA partner to serve data.
- C. Host multipath drivers use the HA partner's direct paths to serve data.
- D. Host multipath drivers use any indirect path on the cluster to serve data.
Answer: D
NEW QUESTION 34
Click the Exhibit button.
Referring to the dual-fabric cabling diagram shown in the exhibit, which scenario explains why the customer's iSCSI host experienced a SAN outage with a LUN on Node 2?
- A. iSCSI LIFs were configured on all nodes, the SLM reporting nodes list included Node 1 and Node 2, and Node 1 went down.
- B. iSCSI LIFs were configured on Node 1 and Node 2 only, the SLM reporting nodes list included Node 1 and Node 2, and Switch 1 went down.
- C. iSCSI LIFs were configured on all nodes, the SLM reporting nodes list included all nodes, and Node 1 and Node 2 went down.
- D. iSCSI LIFs were configured on Node 2 only, the SLM reporting nodes list included Node 1 and Node 2, and the cable connecting the host to Switch 1 went bad.
Answer: C
NEW QUESTION 35
An administrator enabled the iSCSI protocol on an SVM and created a LUN for a VMware ESXi server.
After the administrator performs a rescan, the LUN is not visible on the host.
Which statement describes how to solve this problem?
- A. Create an igroup, add the WWPN of the host initiator, then map the LUN to the igroup.
- B. Create an igroup, add the iSCSI IQN, then map the LUN to the igroup.
- C. Perform a takeover/giveback of the controller that is hosting the LUN.
- D. Enable ALUA support on the VMware host.
Answer: B
NEW QUESTION 36
You have an AFF A220 cluster connected to a dual fabric topology. You must ensure that SAN hosts do not lose access to LUNs during unplanned failures.
Which two operations should be performed to accomplish this task? (Choose two.)
- A. Turn the power off on one disk shelf.
- B. Initiate a reboot of one Fibre Channel switch.
- C. Manually set all FC LIFs on a single node to "down".
- D. Manually set all LUNs offline.
Answer: B,C
NEW QUESTION 37
You have a new 2-node AFF All SAN Array A700 cluster serving iSCSI LUNs. You are asked to test failures of the storage back-end subsystem.
In this scenario, which two actions satisfy the failure criteria? (Choose two.)
- A. Disable Snapshot policies.
- B. Pull an Ethernet cable from a Linux host.
- C. Pull an Ethernet cable from a storage port with a cluster LIF.
- D. Perform a storage controller failover.
Answer: C,D
NEW QUESTION 38
You have an SVM serving LUNs to your VMware environment. You have configured the SAN LIFs, zoning, and multipath by using industry best practices. You need to temporarily migrate a SAN LIF to another host, preserving the SAN LIF's WWPN. You do not want to lose access to the LUNs during LIF migration.
In this scenario, what are three required steps that are needed to accomplish this task? (Choose three.)
- A. Bring the LIF online.
- B. Nondisruptively migrate the LIF to the destination host.
- C. Set the new home node and home port in the LIF.
- D. Take the LIF offline.
- E. Update the zone using the WWPN of the destination host's physical port.
Answer: A,C,D
NEW QUESTION 39
An administrator is designing a SAN solution.
What are two considerations when completing this task? (Choose two.)
- A. limiting the number of paths to eight paths per node
- B. identifying the maximum number of paths that are supported by a host operating system
- C. limiting the number of paths to eight paths per LUN
- D. identifying the maximum number of paths that are supported by a multipath driver
Answer: B,D
NEW QUESTION 40
An administrator wants to connect a DS460C disk shelf to a FAS9000.
Which two statements are correct in this scenario? (Choose two.)
- A. A deep rack is required
- B. A Telco rack is required
- C. A C13/C14 power cable and compatible rack power distribution unit are required.
- D. A C19/C20 power cable and compatible rack power distribution unit are required.
Answer: A,D
NEW QUESTION 41
You are in the testing phase of a newly deployed NVMe over Fibre Channel (NVMe/FC) SAM environment using Asynchronous Namespace Access (ANA). You are unable to successfully fail over a workload.
In this scenario, which action should you perform?
- A. Verify that the host operating system version supports ANA.
- B. Verify that the NVMe/FC host utilities kit is installed for ANA.
- C. Verify that multi-initiator zoning is configured on the FC switches.
- D. Verify that the DM-Multipath driver is configured for ANA.
Answer: D
NEW QUESTION 42
Click the Exhibit button.
Referring to the exhibit, which WWPN would you add to a zone set to provide access to a LUN hosted in ONTAP?
- A. 10:00:00:00:c9:43:f2:9e
- B. 20:00:00:00:c9:43:f2:9e
- C. 50:0a:09:81:87:09:3d:96
- D. 20:lb:00:a0:98:13:d5:d4
Answer: A
NEW QUESTION 43
You have a 2-node AFF A400 cluster serving iSCSI LUNs. Each A400 controller has two aggregates. The LUNs in all aggregates share data that is inline deduplicated. You are asked to enable encryption at rest to satisfy a new compliance requirement.
In this scenario, which at rest encryption solution preserves the current deduplication?
- A. NetApp Aggregate Encryption (NAE)
- B. NetApp Volume Encryption (NVE)
- C. Challenge Handshake Authentication Protocol (CFIAP)
- D. Internet Protocol Security (IPsec)
Answer: A
NEW QUESTION 44
You plan to use Foreign LUN Import (FLI) to migrate data from an older storage array to an ONTAP cluster. You have properly cabled the storage array and the NetApp nodes to your dual-fabric SAN.
Which two steps are required for this migration and cutover? (Choose two.)
- A. Create two zones that contain NetApp initiator ports and the source storage target ports, one for each fabric.
- B. Create two zones that contain the NetApp target ports and the host initiators ports, one for each fabric.
- C. Add NetApp WWN target ports to the existing zones so that your hosts can access both storage arrays.
- D. Add NetApp WWN initiator ports to the existing zones.
Answer: A,C
NEW QUESTION 45
You just finished installing and configuring a new NetApp AFF All SAN Array environment.
In this scenario, which two tools would you use to verify that the environment satisfies best practices? (Choose two.)
- A. Active IQ OneCollect
- B. Active IQ Config Advisor
- C. Active IQ Unified Manager
- D. ONTAP System Manager
Answer: A,B
NEW QUESTION 46
......
Sep-2021 Latest Prep4King NS0-520 Exam Dumps with PDF and Exam Engine: https://www.prep4king.com/NS0-520-exam-prep-material.html
Premium Quality Network Appliance NS0-520 Online dumps: https://drive.google.com/open?id=17o0lfkTus2haa9yNZCeOy3HoifyzVhbo
