Cisco 300-410 Exam Info and Free Practice Test | Prep4King
Pass Cisco 300-410 Premium Files Test Engine pdf - Free Dumps Collection
Registration procedure of Cisco Certified Specialist - Enterprise Advanced Infrastructure Implementation (300-410) Exam
In order to apply for the Cisco Certified Specialist - Enterprise Advanced Infrastructure Implementation (300-410), You have to follow these steps
- Step 1: Visit to Pearson VUE Exam Registration
- Step 2: Signup/Login to Pearson VUE account
- Step 3: Search for Cisco 300-410 Certifications Exam
- Step 4: Select Date, time and confirm with a payment method
What's Next After Cisco ENARSI?
Once you have passed the Cisco ENARSI 300-410 exam, assuming you have already passed the core 350-401 ENCOR test, and have been awarded the prestigious CCNP Enterprise certification, you get new prospects for professional improvement. Earning this certificate automatically earns you the right to boast about it on social media platforms such as LinkedIn to attract more and more job offers with high paying salaries. CCNP Enterprise is valid for a total of 3 years, after which recertification should be done by keeping up with educational activities offered by Cisco or completing exams. Finally, one can also opt for expert-level certifications such as CCIE Enterprise Infrastructure or CCIE Enterprise Wireless. Each of them requires applicants to only pass one extra lab exam.
NEW QUESTION 75
A network engineer is investigating a flapping (up/down) interface issue on a core switch that is synchronized to an NTP server. Log output currently does not show the time of the flap. Which command allows the logging on the switch to show the time of the flap according to the clock on the device?
- A. service timestamps log uptime
- B. clock summer-time mst recurring 2 Sunday mar 2:00 1 Sunday nov 2:00
- C. clock calendar-valid
- D. service timestamps log datetime localtime show-timezone
Answer: D
Explanation:
Explanation
By default, Catalyst switches add a simple uptime timestamp to logging messages. This is a cumulative counter that shows the hours, minutes, and seconds since the switch has been booted up
NEW QUESTION 76
Refer to the exhibit. In which circumstance does the BGP neighbor remain in the idle condition?
- A. if a prefix list is applied on the inbound direction
- B. if prefixes reach the maximum limit
- C. if prefixes are not received from the BGP peer
- D. if prefixes exceed the maximum limit
Answer: D
NEW QUESTION 77
Refer to the exhibit. An engineer is trying to connect to a device with SSH but cannot connect. The engineer connects by using the console and finds the displayed output when troubleshooting.
Which command must be used in configuration mode to enable SSH on the device?
- A. ip ssh version 2
- B. crypto key generate rsa
- C. ip ssh enable
- D. no ip ssh disable
Answer: B
Explanation:
Section: Infrastructure Security
NEW QUESTION 78
Refer to the exhibit.
An IP SLA is configured to use the backup default route when the primary is down, but it is not working as desired. Which command fixes the issue?
- A. R1(config)# ip route 0.0.0.0.0.0.0.0.1.1.1.1 track 1
- B. R1(config)#ip sla track 1
- C. R1(config)# ip route 0.0.0.0.0.0.0.0.2.2.2.2 10 track 1
- D. R1(config)# ip route 0.0.0.0.0.0.0.0.2.2.2.2
Answer: A
NEW QUESTION 79
Refer to the exhibit.
An engineer is trying to configure local authentication on the console line, but the device is trying to authenticate using TACACS+. Which action produces the desired configuration?
- A. Replace the capital "C" with a lowercase "c" in the aaa authentication login Console local command.
- B. Add the aaa authentication login default group tacacs+ local-case command to the global configuration.
- C. Add the aaa authentication login default none command to the global configuration.
- D. Add the login authentication Console command to the line configuration
Answer: D
NEW QUESTION 80
Refer to the exhibits.
When DMVPN is configured, which configuration allows spoke-to-spoke communication using loopback as tunnel source?
- A. Configure crypto isakmp key Cisco address 200.1.0.0 255.255.0.0 on the hub.
- B. Configure crypto isakmp key cisco address 200.1.0.0 255.255.0.0 on the spokes.
- C. Configure crypto isakmp key cisco address 0.0.0.0 on the hub.
- D. Configure crypto isakmp key cisco address 0.0.0.0 on the spokes.
Answer: C
Explanation:
https://www.cisco.com/en/US/technologies/tk583/tk372/technologies_white_paper0900aecd802b8f3c.html
NEW QUESTION 81
Exhibit:
BGP is flapping after the Copp policy is applied. What are the two solutions to fix the issue?
(Choose two)
- A. Configure a higher value for CIR under the default class to allow more packets during peak traffic
- B. Configure IP CEF to CoPP policy and BGP to work
- C. Configure a three-color policer instead of two-color policer under class COPP-CRITICAL-7600
- D. Configure a higher value for CIR under the class COPP-CRITICAL-7600
- E. Configure BGP in the COPP-CRITICAL-7600 ACL
Answer: A,E
Explanation:
The policy-map COPP-7600 only rate-limit HTTP & HTTPS traffic (based on the ACL conditions) so any BGP packets will be processed in the class "class-default", which drops exceeded BGP packets. Therefore we have two ways to solve this problem:
+ Add BGP to the ACL with the statement "permit tcp any any eq bgp"
+ Configure higher value for CIR in default class as 2Mbps is too low for web traffic (http & https)
NEW QUESTION 82
Refer to the exhibit. Users report that IP addresses cannot be acquired from the DHCP server. The DHCP server is configured as shown. About 300 total nonconcurrent users are using this DHCP server, but none of them are active for more than two hours per day.
Which action fixes the issue within the current resources?
- A. Configure the DHCP lease time to a bigger value
- B. Add the network 192.168.2.0 255.255.255.0 command to the DHCP pool
- C. Configure the DHCP lease time to a smaller value
- D. Modify the subnet mask to the network 192.168.1.0 255.255.254.0 command in the DHCP pool
Answer: C
Explanation:
Section: Infrastructure Services
NEW QUESTION 83
Refer to Exhibit.
Traffic from the branch network should route through HQ R1 unless the path is unavailable. An engineer tests this functionality by shutting down interface on the BRANCH router toward HQ_R1 router but 192.168.20.0/24 is no longer reachable from the branch router. Which set of configurations resolves the issue?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: D
Explanation:
In the configuration above, the engineer has made a mistake as he was tracking 172.16.35.6 (the backup path) instead of tracking the main path (172.16.35.2). Therefore,when he shut down the main path, the track 1 was still up so traffic still went through the main path -> it failed.
To fix this issue, we just need to correct the tracking interface of the main path.
NEW QUESTION 84
What is a prerequisite for configuring BFD?
- A. To use BFD with BGP, the timers 3 9 command must first be configured in the BGP routing process.
- B. Cisco Express Forwarding must be enabled on all participating BFD endpoints.
- C. Jumbo frame support must be configured on the router that is using BFD.
- D. All routers in the path between two BFD endpoints must have BFD enabled.
Answer: B
NEW QUESTION 85
Refer to the exhibit.
AAA server 10.1.1.1 is configured with the default authentication and accounting settings, but the switch cannot communicate with the server Which action resolves this issue?
- A. Match the accounting port
- B. Correct the shared secret.
- C. Correct the timeout value.
- D. Match the authentication port
Answer: D
Explanation:
Explanation
Command Default
Accounting port: 1813
Authentication port: 1812
Accounting: enabled
Authentication: enabled
Retransmission count: 1
Idle-time: 0
Server monitoring: disabled
Timeout: 5 seconds
Test username: test
Test password: test
NEW QUESTION 86
Refer to the exhibit.
Drag and drop the credentials from the left onto the remote login information on the right to resolve a failed login attempt to vtys. Not all credentials are used
Answer:
Explanation:
Explanation
VTY0
User name : cisco
Password : letmein
VTY1
Username : no username
Password : Letmein
NEW QUESTION 87
Refer to the exhibit.
Users in the branch network of 2001:db8:0:4::/64 report that they cannot access the Internet. Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?
- A. Issue the no eigrp stub command on R1.
- B. Issue the eigrp stub command on R2.
- C. Issue the eigrp stub command on R1.
- D. Issue the no eigrp stub command on R2.
Answer: A
NEW QUESTION 88
Refer to the exhibit.
An engineer is trying to block the route to 192.168.2.2 from the routing table by using the configuration that is shown. The route us still present in the routing table as an OSPF route. Which action blocks the route?
- A. Use an extended access list instead of a standard access list.
- B. Change sequence 10 in the route-map command from permit to deny.
- C. Add this statement to the route map route-map RM-OSPF-DL deny 20
- D. Use a prefix list instead of an access list in the route map.
Answer: B
NEW QUESTION 89
Refer to the exhibit.
An engineer is monitoring reachability of the configured default routes to ISP1 and ISP2. The default route from ISP1 is preferred if available. How is this issue resolved?
- A. Use the same AD for both default routes
- B. Start IP SLA by matching numbers for track and ip sla commands
- C. Start IP SLA by defining frequency and scheduling it
- D. Use the icmp-echo command to track both default routes
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/ip/ip-routing/200785-ISP-Failover-with-default-routes-using-I.html
NEW QUESTION 90
The implementations group has been using the test bed to do a 'proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, and FHRP services, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
What is the solution to the fault condition?
- A. In Configuration mode, using the interface port-channel 13, port-channel 23, then configure switchport trunk none allowed vlan none followed by switchport trunk allowed vlan 10,200 commands.
- B. In Configuration mode, using the interface port-channel 23, port-channel, then configure switchport trunk allowed vlan none followed by switchport trunk allowed vlan 10,20,200 commands.
- C. In Configuration mode, using the interface port-channel 23 command, then configure switchport trunk allowed vlan none followed by switchport trunk allowed vlan 20,200 commands.
- D. In Configuration mode, using the interface port-channel 13 command, then configure switchport trunk allowed vlan none followed by switchport trunk allowed vlan 20,200 commands.
Answer: A
Explanation:
We need to allow VLANs 10 and 200 on the trunks to restore full connectivity. This can be accomplished by issuing the "switchport trunk allowed vlan 10,200" command on the port channels used as trunks in DSW1.
Mixed Questions
Question Set 1
NEW QUESTION 91
Refer to the exhibits.
A user on the 192.168.1.0/24 network can successfully ping 192.168.3.1, but the administrator cannot ping 192.168.3.1 from the LA router. Which set of configurations fixes the issue?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: A
NEW QUESTION 92
Drag and drop the addresses from the left onto the correct IPv6 filter purposes on the right.
Answer:
Explanation:
NEW QUESTION 93
Refer to the exhibit.
Which configuration denies Telnet traffic to router 2 from 198A:0:200C::1/64?
- A. Ipv6 access-list-Deny_Telnet sequence 10 deny tcp host 198A:0:200C::1/64 host
201A:0:205C::1/64 eq telnet
! int Gi0/0
Ipv6 access-map Deny_Telnet in
! - B. Ipv6 access-list-Deny_Telnet sequence 10 deny tcp host 198A:0:200C::1/64 host
201A:0:205C::1/64 eq telnet
! int Gi0/0
6 / 39
Ipv6 traffic-filter Deny_Telnet in
! - C. Ipv6 access-list-Deny_Telnet sequence 10 deny tcp host 198A:0:200C::1/64 host
201A:0:205C::1/64 ! int Gi0/0
Ipv6 access-map Deny_Telnet in
! - D. Ipv6 access-list-Deny_Telnet sequence 10 deny tcp host 198A:0:200C::1/64 host
201A:0:205C::1/64 ! int Gi0/0
Ipv6 traffic-filter Deny_Telnet in
!
Answer: B
NEW QUESTION 94
Refer to the exhibit.
An administrator that is connected to the console does not see debug messages when remote users log in.
Which action ensures that debug messages are displayed for remote loggings?
- A. Enter the logging console debugging configuration command.
- B. Enter the transport input ssh configuration command.
- C. Enter the terminal monitor exec command.
- D. Enter the aaa new-model configuration command.
Answer: B
NEW QUESTION 95
Which component of MPLS VPNs is used to extend the IP address so that an engineer is able to identify to which VPN it belongs?
- A. RD
- B. LDP
- C. VPNv4 address family
- D. RT
Answer: D
NEW QUESTION 96
Refer to the exhibit.
An engineer is trying to redistribute OSPF to BGP , but not all of the routes are redistributed. What is the reason for this issue?
- A. BGP convergence is slow, so the route will eventually be present in the BGP table.
- B. By default, only internal OSPF routes are redistributed into BGP
- C. Only classful networks are redistributed from OSPF to BGP.
- D. By default, only internal routers and external type 1 routes are redistributed into BGP.
Answer: B
NEW QUESTION 97
......
What Job Opportunities Await Those Certified?
As long as the Cisco CCNP Enterprise is one of the most rewarding certifications out there for computer networking professionals, earning it is a huge plus point that immediately highlights a job-seeker from the rest of the crowd. Being CCNP Enterprise accredited is not only about having a nice certificate to hang on your wall or link in your LinkedIn profile for the world to see. It is also about how competent you have become in performing the more serious, harder tasks of networking that put a company's entire networking infrastructure on your shoulders.
Updated Official licence for 300-410 Certified by 300-410 Dumps PDF: https://www.prep4king.com/300-410-exam-prep-material.html
New 2021 Realistic 300-410 Dumps Test Engine Exam Questions in here: https://drive.google.com/open?id=16VYtF_KYGLmXAXI-NhIlzuJJV3ChP2NK
