Pass HPE2-T37 Exam in First Attempt Guaranteed 2025 Dumps!
HPE2-T37 Dumps Full Questions - Exam Study Guide
HP HPE2-T37 certification exam is an excellent opportunity for IT professionals who work with HPE OneView to validate their knowledge and skills. Using HPE OneView certification helps you demonstrate your expertise in the software and showcases your ability to manage and automate IT operations. If you want to advance your career in infrastructure management, the HP HPE2-T37 certification exam is a valuable credential that can help you achieve your career goals.
NEW QUESTION # 67
Refer to the exhibit.
What does selecting the "Permanent" option mean?
- A. Any write operation to the logical JBOD will be immediately written, bypassing the cache.
- B. To remove data from the logical JBOD, the "erase on delete" option must be selected.
- C. Deleting the logical JBOD is possible only from the CLI with Administrator privileges.
- D. The logical JBOD will not be deleted, even when server profile is deleted.
Answer: D
NEW QUESTION # 68
Which statement about the presented storage pools is true?
- A. All storage pools in managed state have a valid HPE OneView license applied
- B. HPE OneView can be used to configure replication only between managed storage pools
- C. Storage pools in discovered state can be removed from HPE OneView.
- D. All storage pools from the system named ThreePAR-1 can be used for volume provisioning
Answer: D
NEW QUESTION # 69
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?
- A. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.
- B. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
- C. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
- D. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.
Answer: A
NEW QUESTION # 70
Click option that will allow you to select a FlexNIC function for the specified connection.
Answer:
Explanation:
Explanation:
Auto
NEW QUESTION # 71
As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.
Answer:
Explanation:
NEW QUESTION # 72
Which statement about a server profile for an Apollo system is true?
- A. Fibre Channel connections can be defined
- B. UEFI optimized is the only available boot mode
- C. Virtual WWNs and MAC addresses can be defined
- D. Enclosure Group Is automatically selected
Answer: C
Explanation:
Reference: https://support.hpe.com/hpesc/public/docDisplay?docId=a00066162en_us&docLocale=en_ US
NEW QUESTION # 73
Which statement about logical JBODs configured using KPE OneView and D3940 Storage Modules is true?
- A. A logical JBOD cannot be created during server profile creation and must be prepared in advance
- B. A logical JBOD lifecycle can be associated with a server profile lifecycle and drives can be securely erased.
- C. Different types of the drives can be used within a logical JBOD as long as they have the same capacity
- D. Logical JBOD functionality must be enabled on the Enclosure Group level by a storage administrator
Answer: B
NEW QUESTION # 74
Where is the association between an HPE OneView network and uplink port defined?
- A. Within an Enclosure Group definition
- B. Within an HPE OneView network definition
- C. At the Logical Interconnect Group level
- D. At the network set level
Answer: C
NEW QUESTION # 75
Your customer added HPE Primera to HPE OneVlew and enabled volume provisioning on all storage pools.
For security reasons, the customer wants to disable volume provisioning using HPE OneView on a specific storage pool.
How can this task be completed?
- A. The storage pool state should be changed to discovered using HPE OneView.
- B. The storage pool should be disabled using the array management tool.
- C. The storage pool should be removed from HPE OneView using a PowerShell script.
- D. The storage pool should be marked as read-only using HPE OneView.
Answer: B
NEW QUESTION # 76
HOTSPOT
Click the option from the HPE OneView main menu that will allow you to define UPS or other components that will work as a placeholder in a rack system.
Answer:
Explanation:
NEW QUESTION # 77
Click the option that will prevent the appliance from sending any email notifications or forwarding any SNMP traps that are related to the server hardware.
Answer:
Explanation:
NEW QUESTION # 78
Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame.
Answer:
Explanation:
Explanation:
Fabric Type
NEW QUESTION # 79
Refer to the exhibit.
A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?
- A. The firmware repository service must be restarted using maintenance connection.
- B. All of the components are up to date and compliant with firmware baseline.
- C. The firmware repository is not defined within firmware compliance report.
- D. The refresh procedure must be performed on each logical enclosure to refresh firmware.
Answer: D
Explanation:
https://support.hpe.com/hpesc/public/docDisplay?docId=sd00001377en_us&docLocale=en_US&page=ts_fw- compliance-unavailable-troubleshooting.html
NEW QUESTION # 80
You originally configured boot mode for HPE ProLiant Gen10 server to 'Legacy BIOS' in an HPE OneView server profile and deployed an operating system. A few weeks later, you change the boot mode to the 'UEFI optimized' to leverage some features provided by this mode.
What must you do next?
- A. reset BIOS settings to the defaults through the server profile after changing the boot mode
- B. reset BIOS settings to the defaults so UEFI settings can be applied
- C. reinstall an operating system, as UEFI is using different drive format than Legacy BIOS
- D. reset an il_0 management processor to activate the new boot mode for the server
Answer: C
NEW QUESTION # 81
Refer to the exhibit.
A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository.
How should you respond?
- A. The firmware repository service must be restarted using maintenance connection.
- B. All of the components are up to date and compliant with firmware baseline.
- C. The firmware repository is not defined within firmware compliance report.
- D. The refresh procedure must be performed on each logical enclosure to refresh firmware.
Answer: D
NEW QUESTION # 82
Refer to the exhibit.
Which statement about server connections is true?
- A. Ethernet connection is configured to boot from PXE
- B. Storage array is connected directly to an HPE Synergy frame
- C. All connections within the server profile are using physical IDs
- D. LACP on downlinks is configured for Ethernet connection
Answer: A
NEW QUESTION # 83
Which operation can be performed using HPE OneView for VMware vCenter Server?
- A. Remove a new node from an existing cluster
- B. Configure VMware cluster properties tor HA and DRS
- C. Create a new distributed switch for cluster connectivity
- D. Create a new VMware cluster within vCenter Server
Answer: A
NEW QUESTION # 84
Which statement about the presented storage pools is true?
- A. All storage pools in managed state have a valid HPE OneView license applied
- B. HPE OneView can be used to configure replication only between managed storage pools
- C. Storage pools in discovered state can be removed from HPE OneView.
- D. All storage pools from the system named ThreePAR-1 can be used for volume provisioning
Answer: D
NEW QUESTION # 85
You want to put two FlexNlCs into a single Link Aggregation Group within a server profile.
What Is a prerequisite for this setup?
- A. An upgrade license must be purchased and deployed.
- B. The sFlow option must be enabled and configured.
- C. Both FlexNlCs must be connected to the same network.
- D. The Compute Module profile must have exactly two connections defined.
Answer: C
NEW QUESTION # 86
Which HPE compute systems are supported in HPE GreenLake for Compute Ops Management - OneView Edition?
- A. HPE superdome Flex and Superdome Flex 280
- B. HPE ProLiant Gen10 and newer systems
- C. HPE Synergy compute nodes Gen10 or later.
- D. HPE ProLiant G6 and newer systems.
Answer: B
Explanation:
Management - OneView Edition. This offering integrates HPE OneView's management capabilities with the HPE GreenLake cloud platform, providing advanced compute management for modern ProLiant servers.
* Option C (Correct): HPE ProLiant Gen10 and newer systems are compatible with this service.
* Option A: ProLiant G6 servers are legacy systems and are not supported.
* Option B: While HPE Synergy compute nodes are managed by HPE OneView, this specific edition focuses on ProLiant servers.
* Option D: HPE Superdome Flex servers are not included under this particular management edition.
NEW QUESTION # 87
......
Achieving the HPE2-T37 certification can provide various benefits to IT professionals, such as demonstrating their proficiency in HPE OneView, increasing their credibility in the job market, and potentially leading to career advancement opportunities. Additionally, individuals who pass the exam can join the HPE My Learning program, where they can access exclusive training and certification resources to further develop their skills and knowledge in using HPE OneView.
HPE Product Certified - OneView [2022] Free Certification Exam Material from Prep4King with 117 Questions: https://www.prep4king.com/HPE2-T37-exam-prep-material.html
Use Real HPE2-T37 - 100% Cover Real Exam Questions: https://drive.google.com/open?id=1L6BjGJaWtYJKRIgD0mq3FsaZSZuhbeGC
