Real Exam Questions 1Z0-1066-20 Dumps Exam Questions in here [Jan-2022]
Get Latest Jan-2022 Conduct effective penetration tests using 1Z0-1066-20
NEW QUESTION 13
Your Procurement Department is getting ready to set up Approved Supplier Lists that will be needed for Supply Planning. They ask you for what you need on the ASLs for planning usage. Which three options are key for planning? (Choose three.)
- A. Make sure all Local level ASLs include an Organization.
- B. Make sure to include Fixed Order Quantities.
- C. Make sure to include Fixed Lot Multipliers.
- D. Make sure they are at a Global level.
- E. Make sure to include Maximum Order Quantities.
- F. Make sure to include Minimum Order Quantities.
Answer: C,D,F
NEW QUESTION 14
Which disaggregation methods are used for each of these measures: adjusted shipments forecast, target service level, and shipments forecast?
- A. Adjusted shipments forecast uses measure, target service level uses same value, and shipments forecast doesn't have any disaggregation method.
- B. Adjusted shipments forecast uses measure, target service level uses equal, and shipments forecast doesn't have any disaggregation method.
- C. Adjusted shipments forecast uses equal, target service level uses same value, and shipments forecast uses measure.
- D. Adjusted shipments forecast uses proportional, target service level uses same value, and shipments forecast uses measure.
- E. Adjusted shipments forecast uses measure, target service level uses same value, and shipments forecast uses self.
Answer: E
NEW QUESTION 15
You have executed Planning Data Collection and want to confirm that data has successfully been collected.
Identify the three data combinations that can be viewed using the Maintain Supply Network Model Page.
(Choose three.)
- A. Customer Location and Carriers
- B. Supplier Site and Service Level
- C. Calendar and Master Organization
- D. Sales Channel and Demand Class
- E. Safety Stock and Subinventories
Answer: A,B,C
NEW QUESTION 16
Which calendar is supported in the supply planning process but does not support bucketing by week?
- A. Fiscal
- B. Gregorian
- C. Julian
- D. Lunisolar
- E. Roman
Answer: C
Explanation:
NEW QUESTION 17
You want to check how many items have excess inventory. Where must you go in Planning Central to find this information?
- A. Manage Plans > Edit Demand and Supply Plan > Select Supply tab > Navigate to Item area > Filter by Items with Excess Inventory
- B. Configure Exceptions > Expand Supply Planning Exceptions > Select Item With Excess Inventory
- C. Open Table, Graph, or Tile Set > Search Exceptions > Open > Expand Supply Planning Exceptions > Select Item with Excess Inventory
- D. Manage Plans > Edit Supply Plan > Select Supply tab > Navigate to Item area > Filter by Items with Excess Inventory
- E. Configure Exceptions > Expand Demand Planning Exceptions > Select Item With Excess Inventory
Answer: C
Explanation:
NEW QUESTION 18
Which two statements are true when using Measure catalogs? (Choose two.)
- A. Measure catalogs are defined in the system to improve the performance of the plan.
- B. The predefined measure catalog is not the system default.
- C. You navigate to Configure Measure Catalogs to edit the Catalog.
- D. The measure catalog has a collection of measures that you can enable for use in a single plan in the Planning Central work area.
- E. You can add or remove measures from a measure catalog.
- F. You can restrict access to Measure Catalogs using Administer Data Security.
Answer: D,E
Explanation:
Explanation
References:
NEW QUESTION 19
You are defining material planners for your organization. However, when you go to Manage Material Planners, your organization does not appear in the list of values. Why?
- A. The organization must be enabled in Manage Planning Parameters.
- B. The organization was not enabled for collection under Manage Planning Source Systems.
- C. The organization must be enabled in Manage Planning Profile Options.
- D. You do not have data access to the organization.
- E. The organization is an Item Organization.
Answer: B
NEW QUESTION 20
Your clients want to simulate how canceling demand may impact a plan. Which two steps must be done to simulate this change? (Choose two.)
- A. Run plan with 'Refresh with current data'
- B. Open plan > View Supplies and Demands > Remove the sales order from the plan and firm demand > Save changes
- C. Open plan > View Supplies and Demands > Firm the demand and set firm quantity to 0 > Save changes
- D. Run plan with 'Do not refresh with current data'
- E. Manage Plans > Edit Plan Options > Add simulation set
Answer: C,D
NEW QUESTION 21
The structure of the Plan Summary Layout is a predefined __________.
- A. Supply Demand Workbench
- B. Group of Reports
- C. Set of Infotiles
- D. Material Plan view
- E. Set of Exceptions
Answer: C
NEW QUESTION 22
Your client has reviewed all of the current graphs available for the plans, but cannot find one that shows them exactly what they want for the Days of Supply. How can this key performance indicator be added?
- A. Open the plan and go to Actions > Manage Tables, Graphs, and Analysis Sets, and add a new graph with the requested data.
- B. It is not possible to add new or change the current graphs.
- C. Go to Configure Planning Analytics > Actions > Manage Tables, Graphs, and Analysis Sets, and edit the current 'Days of Supply' graph to meet the client needs.
- D. Open the plan and go to Actions > Manage Tables, Graphs, and Analysis Sets, and edit the current
'Days of Supply' graph to meet the client needs. - E. Go to Configure Planning Analytics > Actions > Manage Tables, Graphs, and Analysis Sets, and add a new graph with the requested data.
Answer: A
NEW QUESTION 23
During implementation, the customer would like to use safety stock planning parameters. However, they would like to uncheck "Safety stock change interval to all items." What will the results be if they choose to uncheck this parameter?
- A. Safety stock will use a smoothing method to calculate the safety stock within change interval to determine the level of safety stock needed without this parameter.
- B. This option will require a min/max quantity for this parameter even though it will not be used.
- C. Safety stock change interval will only apply to items with Days of Cover safety stock method.
- D. Safety stock will not be calculated at all for this plan.
Answer: C
Explanation:
NEW QUESTION 24
Which two statements are true regarding Planning Business Flows? (Choose two.)
- A. Demand and Supply Planning have to be run in separate business flows.
- B. Planners can set up automatic release rules or release orders manually as part of the plan execution.
- C. Inventory Planning cannot run in the Planning Business Flows.
- D. In automated plans, all release rules must be automatic.
- E. You can analyze and adjust data at any stage of the process.
Answer: B,E
NEW QUESTION 25
Which four types of supplies can be reserved to a sales order in the inventory? (Choose four.)
- A. Purchase orders
- B. Transfer orders
- C. Purchase requisitions
- D. On-hand inventory
- E. Work orders
- F. Planned Orders
Answer: A,B,D,E
NEW QUESTION 26
Which option outlines changes you can make to a simulation plan when evaluating demand and supply?
- A. Change item specification values, change item lead times, change item-organization specification values
- B. Change item specification values, change item lead times, create mass changes for items all at once, change item-organization specification values
- C. Add demands, cancel demands, reschedule demands, add new planned orders, reschedule supplies
- D. Change item specification values, change item lead times, create mass changes for items
- E. Add demands, cancel demands, reschedule demands, add supply, cancel supply, reschedule supplies
Answer: E
NEW QUESTION 27
Which three statements are true regarding exceptions? (Choose three.)
- A. The conditions under which exceptions are generated can be modified.
- B. You can act on an exception by selecting it and clicking 'Resolve exception'. A list of ways to resolve will be generated.
- C. You can create custom exceptions.
- D. You can drill down into Supplies and Demand from an exception line.
- E. You can export exception tables to Excel.
- F. The calculation logic for exceptions can be modified.
Answer: A,E,F
NEW QUESTION 28
You are running a demand plan for the first time and you want to generate forecast for the next six months.
Which two demand plans run options should be selected? (Choose two.)
- A. Under data refresh options, select "Refresh with demand planning data."
- B. Under data refresh options, select "Refresh with selected current data" and chose sales orders.
- C. Select forecast shipments as forecast profiles.
- D. Select sales orders as forecast profile.
- E. Under data refresh options, select "Refresh with current data."
Answer: D,E
NEW QUESTION 29
What is one method of associating a Safety Stock Quantity value to an item?
- A. Enter your value in the Safety Stock Quantity Override column in the Items page.
- B. Upload the value using File Based Data Import (FBDI)
- C. Enter your value in the Safety Stock Quantity column in the Items page.
- D. Run the Safety Stock Quantity Update Process.
Answer: C
NEW QUESTION 30
As the planner, you have made some changes to a few of the specifications for items in your simulation sets.
You would like to run one of your existing Demand and Supply Plans that contains this simulation set to see how these changes impact the plan.
Which option shows the steps you must complete in order to ensure that when you run your existing Demand and Supply plan, it contains your changes to the simulation set?
- A. When the Demand and Supply Plan is run, verify that 'Recalculate Safety Stock' is selected in the Details section.
- B. When the Demand and Supply Plan is run, verify that 'Refresh with current data' is selected in the Details section.
- C. You are only able to update one item attribute at a time. Since you have changed multiple attributes, you will be unable to update and run this plan.
- D. No additional steps are necessary. Any plans that contain your simulation set will automatically be updated with the changes.
Answer: B
NEW QUESTION 31
You are a demand planner and you want to generate forecast for all laptop and desktop products in the US business unit. You are using standard enterprise and product hierarchy. You have created a demand plan and now you must define plan scope.
Identify three valid steps. (Choose three.)
- A. For forecasting items, select hierarchy as product, level as category level 1, and laptop and desktop categories as level members.
- B. For plan parameters, select forecasting calendar as Gregorian and time level as week.
- C. For plan organizations, select hierarchy as enterprise, level as country, and US as level member.
- D. For plan parameters, select forecasting calendar as Gregorian and time level as month.
- E. For forecasting items, select hierarchy as product, level as product, and all laptop and desktop products as level members.
- F. For plan organizations, select hierarchy as enterprise, level as business unit, and US and level member.
Answer: A,B,C
Explanation:
NEW QUESTION 32
Which four types of items are eligible to be included as Supply Planned Items in the Supply Plan? (Choose four.)
- A. All planned items
- B. Demand plan items
- C. Supply plan items
- D. Purchased Items
- E. All sales orders
- F. WIP components
Answer: A,B,E,F
NEW QUESTION 33
......
Authentic Best resources for 1Z0-1066-20 Online Practice Exam: https://www.prep4king.com/1Z0-1066-20-exam-prep-material.html
