JN0-636 Certification - The Ultimate Guide [Updated 2023]
JN0-636 Practice Exam and Study Guides - Verified By Prep4King
Juniper JN0-636 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 11
Exhibit
Referring to the exhibit, which type of NAT is being performed?
- A. Destination NAT
- B. Static NAT
- C. Persistent NAT
- D. Source NAT
Answer: D
NEW QUESTION 12
You want to enforce I DP policies on HTTP traffic.
In this scenario, which two actions must be performed on your SRX Series device? (Choose two )
- A. Disable screen options on the Untrust zone.
- B. Match on application junos-http.
- C. Choose an attacks type in the predefined-attacks-group HTTP-All.
- D. Specify an action of None.
Answer: B,D
NEW QUESTION 13
To analyze and detect malware, Juniper ATP Cloud performs which two functions? (Choose two.)
- A. antivirus scan: with a single vendor solution to see if the file contains any potential threats
- B. cache lookup: to see if the file is seen already and known to be malicious
- C. dynamic analysis: to see what happens if you execute the file in a real environment
- D. static analysis: to see what happens if you execute the file in a real environment
Answer: A,D
NEW QUESTION 14
Exhibit
Which two statements are correct about the output shown in the exhibit? (Choose two.)
- A. The packet is part of an existing session.
- B. The packet is silently discarded.
- C. The packet is explicitly rejected.
- D. The packet is part of a new session.
Answer: C,D
NEW QUESTION 15
Exhibit
You are validating bidirectional traffic flows through your IPsec tunnel. The 4546 session represents traffic being sourced from the remote end of the IPsec tunnel. The 4547 session represents traffic that is sourced from the local network destined to the remote network.
Which statement is correct regarding the output shown in the exhibit?
- A. NAT is being used to change the source address of outgoing packets
- B. The session information indicates that the IPsec tunnel has not been established
- C. The local gateway address for the IPsec tunnel is 10.20.20.2
- D. The remote gateway address for the IPsec tunnel is 10.20.20.2
Answer: D
NEW QUESTION 16
You want to enroll an SRX Series device with Juniper ATP Appliance. There is a firewall device in the path between the devices. In this scenario, which port should be opened in the firewall device?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 17
Exhibit
You are trying to configure an IPsec tunnel between SRX Series devices in the corporate office and branch1. You have committed the configuration shown in the exhibit, but the IPsec tunnel is not establishing.
In this scenario, what would solve this problem.
- A. Change the local identity to inet advpn on the branch1 device.
- B. Change the IKE proposal-set to compatible on the branch1 and corporate devices.
- C. Add multipoint to the st0.0 interface configuration on the branch1 device.
- D. Change the IKE mode to aggressive on the branch1 and corporate devices.
Answer: A
NEW QUESTION 18
Click the Exhibit button.
Referring to the exhibit, which three topologies are supported by Policy Enforcer? (Choose three.)
- A. Topology 3
- B. Topology 4
- C. Topology 1
- D. Topology 2
- E. Topology 5
Answer: A,B,C
NEW QUESTION 19
Exhibit
Referring to the exhibit, which three statements are true? (Choose three.)
- A. The packet's destination is to a server in the DMZ zone.
- B. The packet is allowed to make an SSH connection.
- C. The packet's destination is to an interface on the SRX Series device.
- D. The packet is dropped before making an SSH connection.
- E. The packet originated within the Trust zone.
Answer: C,D,E
NEW QUESTION 20
The monitor traffic interface command is being used to capture the packets destined to and the from the SRX Series device.
In this scenario, which two statements related to the feature are true? (Choose two.)
- A. This feature captures ICMP traffic to and from the SRX Series device.
- B. This feature is supported on high-end SRX Series devices only.
- C. This feature is supported on both branch and high-end SRX Series devices.
- D. This feature does not capture transit traffic.
Answer: C,D
Explanation:
https://forums.juniper.net/t5/Ethernet-Switching/monitor-traffic-interface/td-p/462528
NEW QUESTION 21
Exhibit
You have configured the SRX Series device to switch packets for multiple directly connected hosts that are within the same broadcast domain However, the traffic between two hosts in the same broadcast domain are not matching any security policies Referring to the exhibit, what should you do to solve this problem?
- A. You must change the global mode to switching mode.
- B. You must change the global mode to security bridging mode
- C. You must change the global mode to transparent bridge mode.
- D. You must change the global mode to security switching mode.
Answer: B
NEW QUESTION 22
You are not able to activate the SSH honeypot on the all-in-one Juniper ATP appliance.
What would be a cause of this problem?
- A. The collector must have a minimum of four interfaces.
- B. The collector must have a minimum of two interfaces.
- C. The collector must have a minimum of three interfaces.
- D. The collector must have a minimum of five interfaces.
Answer: A
Explanation:
https://www.juniper.net/documentation/en_US/release-independent/jatp/topics/task/configuration/jatp-traffic-collectorsetting-ssh-honeypot-detection.html
NEW QUESTION 23
You are connecting two remote sites to your corporate headquarters site.You must ensure that all traffic is secured and sent directly between sites In this scenario, which VPN should be used?
- A. hub-and-spoke IPsec VPN
- B. full mesh Layer 3 VPN with EBGP
- C. Layer 2 VPN
- D. IPsec ADVPN
Answer: A
NEW QUESTION 24
You issue the command shown in the exhibit.
Which policy will be active for the identified traffic?
- A. Policy p7
- B. Policy p12
- C. Policy p1
- D. Policy p4
Answer: A
NEW QUESTION 25
Exhibit
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The data that traverses the ge-070/0 interface can be intercepted and read by anyone.
- B. The data that traverses the ge-070/0 interface cannot be intercepted and read by anyone.
- C. The data that traverses the ge-O/0/0 interface is secured by a connectivity association key.
- D. The data that traverses the ge-0/070 interface is secured by a secure association key.
Answer: A,B
NEW QUESTION 26
Exhibit
The exhibit shows a snippet of a security flow trace.
In this scenario, which two statements are correct? (Choose two.)
- A. An existing session is found in the table.
- B. Destination NAT occurs.
- C. The capture is a packet from the source address 172.20.101.10 destined to 10.0.1.129.
- D. This packet arrived on interface ge-0/0/4.0.
Answer: A,C
NEW QUESTION 27
Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The c-1 TSYS has a reservation for the security flow resource.
- B. The c-1 TSYS can use security flow resources up to the system maximum.
- C. The c-1 TSYS cannot use any security flow resources.
- D. The c-1 TSYS has no reservation for the security flow resource.
Answer: C,D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-profile-logical-system.html
NEW QUESTION 28
Your Source NAT implementation uses an address pool that contains multiple IPv4 addresses Your users report that when they establish more than one session with an external application, they are prompted to authenticate multiple times External hosts must not be able to establish sessions with internal network hosts What will solve this problem?
- A. Enable destination NAT.
- B. Enable persistent NAT
- C. Enable address persistence.
- D. Disable PAT.
Answer: B
NEW QUESTION 29
You are requested to enroll an SRX Series device with Juniper ATP Cloud.
Which statement is correct in this scenario?
- A. If a device is already enrolled in a realm and you enroll it in a new realm, the device data or configuration information is propagated to the new realm.
- B. The only way to enroll an SRX Series device is to interact with the Juniper ATP Cloud Web portal.
- C. When the license expires, the SRX Series device is disenrolled from Juniper ATP Cloud without a grace period
- D. Juniper ATP Cloud uses a Junos OS op script to help you configure your SRX Series device to connect to the Juniper ATP Cloud service.
Answer: A
NEW QUESTION 30
......
Ultimate Guide to the JN0-636 - Latest Edition Available Now: https://www.prep4king.com/JN0-636-exam-prep-material.html
2023 Updated Verified Pass JN0-636 Study Guides & Best Courses: https://drive.google.com/open?id=1AHnFAp0WhsktIF5wgVKFAVIfkaPMT3vW
