Prepare HPE6-A81 Exam Questions [2023] Recently Updated Questions [Q22-Q45]

Prepare HPE6-A81 Exam Questions [2023] Recently Updated Questions

Give push to your success with HPE6-A81 exam questions

The HPE6-A81 certification exam is an important credential for IT professionals who work with Aruba ClearPass technology. It validates an individual's skills and knowledge in designing, implementing, and managing complex ClearPass solutions. This certification is particularly important for professionals who work in organizations with large and complex networks, where network access control is critical to the security of the network.

 

NEW QUESTION # 22
Which statements art true about controller-initiated and server-initiated login method? (Select two)

• A. server-initiated login method should be used if the guest users network login will be handled by the ClearPass by standing a CoA after authentication request is posted to itself when the user attempts a login
• B. Controller-initiated login method should be used if the guest user's network login will be handled by the controller-based AP to perform the HTTP post when the user attempts a login.
• C. Controller-initiated login method should be used of the guest user's network login will be handled by the guest browser to perform the HTTP port when the user attempts a login
• D. server-initiated login method should be used if the guest user's network login will be handled by ClearPass by sending the authentication request to itself when the user attempts a login
• E. server-in it will login method should be used if the guest user s network login will be handled by the wired switch by standing the authentication request to (PPM when the user attempts a login

Answer: C,D,E

NEW QUESTION # 23
The customer has a 19.940 loT devices connected to the network and would like to use Allow All Mac Auth to authenticate the users and enforce the action based on the condition defined with the fingerprint details of the device. Which Authorization source would you use to decide the access of the devices?

• A. Clear Pass Profiler Database
• B. Guest Device Database
• C. Endpoint Database
• D. Local User Database

Answer: B

NEW QUESTION # 24
A customer would like to allow only the AD users with the "Manager" title from the "HO" location to Onboard their personal devices. Any other AD users should not be authorized to pass beyond the initial device provisioning page. Which Onboard service will you use to implement this requirement?

• A. Onboard Provisioning service
• B. Onboard CP login service
• C. Onboard Pre-Auth service
• D. Onboard Authorization service

Answer: B

NEW QUESTION # 25
Refer to the exhibit.

A customer with multiple Aruba Controllers has just installed a new certificate for "'.customerdomain.com- on all Aruba Controllers While testing the existing guest Self-Registration page the customer noticed that the logins are failing While troubleshooting they are finding no entries in the Event Viewer or Access Tracker for the tests Suspecting that the Aruba Controllers may not be properly posting the credentials from the guest browser, they open the NAS Vendor Settings for the Guest Self-Registration Page.

• A. Change the "IP Address field to "captiveportal-login.customerdomain.com".
• B. Add PTR records on the DNS server for "securelogin arubanetworks.com".
• C. Change the "Secure Login' field to "Use Vendor Default".
• D. Change the 'IP Address field to" securelogin.customerdomain.com

Answer: A

NEW QUESTION # 26
Your customer has recently implemented a seIf-registration portal in ClearPass Guest to be used on a Guest SSID broadcast from an Aruba controller Your customer has started complaining that the users are not able to reliably access the Internet after clicking the login button on the receipt page They tell you that the users will click the login button multiple times and after about a minute they gam access.
What could be causing this issue?

• A. The self-registration page is configured with a 1 minute login delay.
• B. The guest users are assigned multiple DNS servers delaying DNS response.
• C. The enforcement profile on ClearPass is set up with an IETF:session delay.
• D. The guest users are assigned a firewall user role that has a rate limit.

Answer: C

NEW QUESTION # 27
You have designed a ClearPass solution for an Information Technology Business Park with 50,377 concurrent sessions including the visitors. The deployment includes eight ClearPass servers handling RADIUS authentication. Guest Self-Registration. Onboard and OnGuard. CPPM1 is acting as Publisher. CPPM2 to CPPM8 are added as subscriber nodes CPPM4 is the designated Standby Publisher. Servers CPPM2 and CPPM3 will be handling the Guest and Onboard HTTPS traffic. On a few devices, Corporate users will perform username and password based authentication with Active Directory accounts and on few devices, they will be using private CA signed TLS certificates to do the authentication The customer has three Active Directories (AD1, AD2 and A03) part of Multi-Domain Forest. To provide authentication redundancy, the customer has configured multiple Virtual IP settings between ClearPass servers in a cluster.

On all the Network Access Devices (NAD), the primary authentication server is configured as the VIP IP address and the secondary authentication server rs configured as CPPM1 MGMT IP address Based on the information provided, which ClearPass nodes will you join to the AD domain

• A. Join CPPM2 to CPPM7 ClearPass servers to the AD root domain.
• B. Join CPPM1. CPPM4 to CPPM7 servers to the AD root domain
• C. Join all the eight ClearPass servers to AD1, AD2 and AD3 domains.
• D. Join CPPM1. CPPM4 to CPPM8 to the AD1. AD2 and AD3 domains.

Answer: D

NEW QUESTION # 28
Refer to the exhibit.

A customer it troubleshooting a client not getting the SHV posture updated and the OnGuard agent shows the Health Status Not Known. What could the user do to update the health status?

• A. change the Policy Manager Zone mapping and add the WIRED interface range
• B. connect using an interface that is configured as Managed Interface
• C. modify the agent.conf file and add the WIRED interface to it
• D. reinstall the OnGuard agent from the Wired interface

Answer: C

NEW QUESTION # 29
A customer is troubleshooting the OnGuard Client Activity and is looking into the Live Monitoring -> OnGuard Activity section. What is the Status field representing for this client ?

• A. the Client has been successfully profiled
• B. the Client is successful authenticated
• C. the Client is online and sends keep-alive messages
• D. the Client health status is HEALTHY

Answer: A

NEW QUESTION # 30
A customer has deployed an OnGuard Solution to all the corporate devices using a group policy result to push the OnGuard Agtnts. The network administrator is complaining that soma of the agents are communicating to the ClearPass server that is located in a DMZ. outside the firewall The network administrator wants all of the agents System Health Validation traffic to stay inside the Management subnets.
What can the ClearPass administrator do to move the traffic only to the ClearPass Management Ports?

• A. Select the correct OnGuard Agent installer, and use the one configured for Management Port for the clients.
• B. Filter TCP port 6658 on the firewall, forcing the OnGuard agent to use the ClearPass Management port.
• C. Edit the agent.conf file being deployed to the clients to use the ClearPass Management Port for SHV updates
• D. Configure a Policy Manager Zone mapping so the OnGuard agent will use the Management Port IP.

Answer: B

NEW QUESTION # 31
You have configured a Guest SSIO with Captive-portaI Web Authentication and MAC authentication. The MAC caching expiry time set to 12 hours and the Guest Account expiration time is set to 8 hours. What will happen if the guest were to disconnect from the SSID and re-connect 9 hours later?

• A. The client will fail to get the MAC Caching role and will be redirected to the captive portal login page
• B. The client will successfully pass the MAC authentication but still be redirected to captive portal page.
• C. The client will fail the MAC authentication and be denied access to the Guest SSIO.
• D. The client will successfully pass the mac authentication until the mac caching time expires.

Answer: B

NEW QUESTION # 32
Refer to the exhibit.

The customer complains that the user shown cannot log into the ClearPess Server at an administrator using the [Policy Manager Admin Network Login Service]. What could be the reason for this?

• A. The user might be used for a TACACS authentication.
• B. The mapping on the role should be changed to [RADIUS Super Admin]
• C. The account created does not fit this purpose.
• D. The local user authentication might be disabled.

Answer: C

NEW QUESTION # 33
A corporate Clear Pass Cluster with two servers located at a single site, has both Management and Data port IP addresses configured. The Management port IPs art in the DataCenter networks subnet, while the Data port IPs are in the DMZ. What is the difference between using one Virtual IP for the AAA traffic versus sending AAA requests to the physical IPs for each server' (Select two.)

• A. By using the Virtual IP, the failover wait time is faster than using individual server IPs.
• B. The Individual IPs can provide failover and load balancing.
• C. One Virtual IP can be used together with the individual server IPs for load balancing.
• D. The failover can be accomplished only by using Virtual IP
• E. Using the one Virtual IP can provide failover.

Answer: A,E

NEW QUESTION # 34
Refer to the exhibit.


You have integrated the Cisco switch with ClearPass to do MAC-Auth for Cisco IP Phones. The phones connect to the network successfully but when you try to change the status of the device from the access tracker, you see only the ArubaOS Radius terminate session options and not the Cisco vendor terminate session options. What will you check to fix this issue?

• A. Verify if the Cisco IP Phone is actively connected to the switch to get the Cisco CoA options from ClearPass.
• B. Verify if the ClearPass supports RADIUS Dynamic Authorization for the Cisco IP Phones doing MAC.AUTH.
• C. Verify that Cisco is chosen as the vendor name while adding the Cisco Switch under network devices.
• D. Verify if the Enable RADIUS Dynamic Authorization option is checked for the Cisco switch added under the network devices.

Answer: C

NEW QUESTION # 35
Refer to the exhibit.

You configured the Wired MAC - Auth service enforcement conditions with the Endpoint profiling data When mac-auth based clients connect to the network, ClearPass assigns Deny access profile. The customer has sent you the above screenshots How would you resolve the issue?

• A. Create a new condition in first position with Type and operator as Authorization (Endpoint Repository]:Category NOT_EXISTS with action as Limited access profile allowing only DHCP service.
• B. Create a new condition in last position with Type and operator as Tips:Role EQUALS [User Authenticated] with action as Allow access profile permitting any services and any ports to do profiling.
• C. Change the Rules evaluation algorithm in the Enforcement policy of HPE ArubaOS Mac auth policy as "select all matches" and add the CoA action as HPE Bounce switch port in the profiler tab.
• D. Create a new condition in the first position with Type and operator as Authorization [Endpoint Repository] Category NOT_EXISTS with action as Limited access profile and ArubaOS wireless terminate session

Answer: C

NEW QUESTION # 36
Refer to the exhibit.

A customer has configured Onboard in a cluster. After the Primary server's failure, the BYOD devices fail to connect to the network. Which step below is the best starting point when troubleshooting'

• A. Verify the CPPM hostname in OSCP URL under TLS authentication method is updated to localhost instead of primary server's hostname.
• B. Reboot the active ClearPass server and reconnect the client to the SSID by selecting the correct certificate when prompted.
• C. Check if a DNS entry is available for the ClearPass hostname in the certificate, resolvable from the DNS server assigned to the client.
• D. Check EAP certificate on the secondary node is issued by the same common root Certificate Authority (CA).

Answer: A

NEW QUESTION # 37
Refer to the exhibit.


The customer configured a guest operator access by creating a custom operator profile and the built-in universal ClearPass profile mapping translation rule. When he tests the setup, he gets authentication failed. Using the streenshots sent by the customer as a reference, what would suggest to the customer to fix the issue?

• A. To re-enter the correct username and password for the Active Directory user Mike07.
• B. To correct the case sensitive attribute name in the enforcement profile to admin_privileges
• C. To map the operator profile name HS_Receptionist in the translation rule value field
• D. To verify if the username Mike07 has the Active Directory Title attribute set as Reception.

Answer: C

NEW QUESTION # 38
Refer to the exhibit.

You are doing a ClearPass PoC at a customer site with a single Aruba Mobility Controller. The customer asked for a demonstration of a simple Web Login functionality. You used a service template to create the guest services. During testing, the user gets redirected back to the weblogin page with an Authentication failed message The guest configurations on the Aruba Mobility Controller are configured correctly Why would the guest fail to authenticate successfully?

• A. The username and/or password used for authentication is incorrect Re-enter the correct password on the weblogin page.
• B. The Unique-Device- Count does not allow any Client devices. Update the Enforcement policy condition: Unique-Device-Count.
• C. The authentication source mapped in the service is incorrect It should be mapped as [Guest Device Repository! (Local SQL DB].
• D. The username used for authentication does not exist in the Guest User Database. Create a new user and authenticate again

Answer: B

NEW QUESTION # 39
What configuration steps should you follow to add terms and conditions page on Guest seIf-registration for CPPM? (Select two).

• A. Create an HTML page with custom terms and condition and upload it to public files under Clearpass Guest -> configuration -> content manager
• B. Edit the creatoracceprterms form field in receipt page and change HTML section by pointing the hyperlink to the HTML file uploaded
• C. Edit the creetoraccepiterms form field in register page and change HTML section by pointing the hyperlink to the HTML file uploaded
• D. Edit the accept_terms form field in receipt page and change HTML section by pointing the hyper link to the HTML file uploaded m Guest Manager
• E. Create an HTML page with custom terms and condition and upload it to private files under Clearpass Guest -> configuration -> content manager

Answer: A,B

NEW QUESTION # 40
Refer to the exhibit.

You have set up a home lab for ACCX exam preparation with Aruba Clear Pass integrated with Aruba Controller and Instant Access Point Guest Mac Caching functionality is configured only for Aruba Controller's guest SSID and a common Web Login page is configured for both NAD devices You tested and verified the mac caching functionality for a client by connecting it to the Aruba Controller's guest SSID.
What will happen when you disconnect the client from Aruba Controller's guest SSID and connect it to Instant APs guest SSID?

• A. The client will fail the mac authentication and will be redirected to the captive portal page.
• B. The client will be redirected to the captive portal page to complete the web authentication.
• C. The client does not have to complete any authentication as the re-connection was immediate.
• D. The client will bypass the captive portal authentication by completing the MAC authentication.

Answer: D

NEW QUESTION # 41
A customer has multiple Aruba Controllers integrated with ClearPass for guest access using a controller-initialed login method. The customer is aware that a public CA-signed captive portal certificate is required in Aruba controllers for controller-initiated workflows. The customer has purchased unique public CA-signed server certificates for each controller.
What configuration steps would you suggest to the customer to complete the deployment? (Select three.)

• A. From the Aruba controller, enable the option 'Add switch ip address in the redirection URL' under the respective guest AAA profile mapped in the VAP profile.
• B. Edit the HTML header in the weblogin/ self-registration register page with a script to match the controllers IP and captive portal certificate CN names respectively.
• C. Add all the controller IP address and its certificate common names in the DNS server's Forward Lookup Zones and Reverse Lookup Zones to resolve queries from client.
• D. From the Aruba controller, enable the option "Add switch IP address in the redirection URL" under the respective L3 Authentication profile mapped in the initial role
• E. From the weblogin/ self-registration page NAS Vendor settings, enable the check box for "The controller will send the IP to submit credentials" under Dynamic address.
• F. From the weblogin/ self-registration page Login form settings, enable the check box for "The controller will send the IP to submit credentials" under Dynamic address.

Answer: A,E,F

NEW QUESTION # 42
What is the Secure SSIO (otherwise referred to as Single SSID) OnBoard deployment service workflow?

• A. Onboard Authorization RADIUS service. Onboard Pre-Auth Application service. Onboard Provisioning RADIUS service Onboard Provisioning RADIUS service. Onboard Prt-Auth Application service.
• B. Onboard Authorization Application service. Onboard Provisioning RADIUS service Onboard
• C. Onboard Provisioning RADIUS service, Onboard Authorization Application service, Onboard Pre-Auth Application service. Onboard Provisioning RADIUS service Onboard Provisioning RADIUS service,
• D. Provisioning RADIUS service. Onboard Pre-Auth RADIUS service. Onboard Authorization Application service. Onboard Provisioning RADIUS service.

Answer: B

NEW QUESTION # 43
Refer to the exhibit.

What enforcement profile will be assigned to a client who has successfully completed the user and machine authentication with UNKNOWN posture token?

• A. Redirect to Aruba OnBoard Portal
• B. Redirect to Aruba Dissolvable_page Profile
• C. Deny Access Profile
• D. Redirect to Aruba Quarantine Profile

Answer: B

NEW QUESTION # 44
Refer to the exhibit.


A customer is doing a new ClearPass installation and is setting up clustering between two ClearPass servers running a 6.8.6 version. The ClearPass server failed to add the subscriber node. The customer was able to login to the console of the ClearPass server with the same CLI password used during the cluster setup. The customer has sent you the screenshots seeking your support Why did an attempt to add a subscriber node failed showing that error?

• A. The subscriber server is running with a default self -signed HTTPS certificate
• B. The data and time in the subscriber was not synchronized with the NTP server
• C. The default database certificate used in the publisher server is not a valid certificate
• D. The subscriber server is running with a public signed and trusted HTTPS certificate

Answer: A

NEW QUESTION # 45
......

Get HPE6-A81 Actual Free Exam Q&As to Prepare Certification: https://www.prep4king.com/HPE6-A81-exam-prep-material.html