Prepare for your exam certification with our 200-301 Certified Cisco [Q229-Q254]

Share

Prepare for your exam certification with our 200-301 Certified Cisco

Free Cisco 200-301 Exam 2022 Practice Materials Collection


What Skills Does It Measure?

The Cisco 200-301 test is designed to gage the following skills:

  • Network Fundamentals (20%);
  • Network Access (20%).
  • Automation and Programmability (10%);

Topics Covered in Cisco 200-301 Exam

In a nutshell, the Cisco 200-301 exam embodies the questions covering the basics of the latest technologies and software development knowledge. The skills measured in the test tackle various topics, including but not limited to:

  • Security basics – 15%;
  • Automation & programmability – 10%;
  • IP services – 10%;
  • Network fundamentals – 20%;

 

NEW QUESTION 229
Refer to the exhibit.

Which two commands, when configured on router R1, fulfill these requirements? (Choose two.) Packets towards the entire network 2001:db8:2::/64 must be forwarded through router R2.
Packets toward host 2001:db8:23::14 preferably must be forwarded through R3.

  • A. Ipv6 route 2001:db8:23::14/128 fd00:13::3
  • B. Ipv6 route 2001:db8:23::/64 fd00:12::2
  • C. Ipv6 route 2001:db8:23::14/64 fd00:12::2 200
  • D. Ipv6 route 2001:db8:23::14/64 fd00:12::2
  • E. Ipv6 route 2001:db8:23::/128 fd00:12::2

Answer: B,C

 

NEW QUESTION 230
The service password-encryptio command is entered on a router. What is the effect of this configuration?

  • A. prevents network administrators from configuring clear-text passwords
  • B. restricts unauthorized users from viewing clear-text passwords in the running configuration
  • C. protects the VLAN database from unauthorized PC connections on the switch
  • D. encrypts the password exchange when a VPN tunnel is established

Answer: B

 

NEW QUESTION 231
Refer to the exhibit.

What is the most appropriate summarization for these routes?

  • A. 10.0.0.0 /23
  • B. 10.0.0.0 /22
  • C. 10.0.0.0 /21
  • D. 10.0.0.0 /24

Answer: B

 

NEW QUESTION 232
Refer to the exhibit.

Which switch becomes the root bridge?

  • A. S4
  • B. S1
  • C. S2
  • D. S3

Answer: C

 

NEW QUESTION 233
Drag and drop the functions of DHCP from the left onto any of the positions on the right Not all functions are used

Answer:

Explanation:

 

NEW QUESTION 234
Drag the IPv6 DNS record types from the left onto the description on the right.

Answer:

Explanation:

Explanation

https://ns1.com/resources/dns-types-records-servers-and-queries#:~:text=Address%20Mapping%20record%20(A

 

NEW QUESTION 235
Refer to the exhibit.

Router R1 must be configured to reach the 10.0.3.0/24 network from the 10.0.1.0/24 segment.
Which command must be used to configure the route?

  • A. ip route 10.0.3.0 0.255255.255 10.0.4.2
  • B. route add 10.0.3.0 mask 255.255.255.0 10.0.4.3
  • C. Ip route 10.0.3.0 255.255.255.0 10.0.4.3
  • D. route add 10.0.3.0 0.255.255.255 10.0.4.2

Answer: C

 

NEW QUESTION 236
Refer to the exhibit.

Which configuration on RTR-1 denies SSH access from PC-1 to any RTR-1 interface and allows all other traffic?

  • A. access-list 100 deny tcp host 172.16.1.33 any eq 23 access-list 100 permit ip any any
    line vty 0 15 ip access-group 100 in
  • B. access-list 100 deny tcp host 172.16.1.33 any eq 22 access-list 100 permit ip any any
    interface GigabitEthernet0/0 ip access-group 100 in
  • C. access-list 100 deny tcp host 172.16.1.33 any eq 23 access-list 100 permit ip any any
    interface GigabitEthernet0/0 ip access-group 100 in
  • D. access-list 100 deny tcp host 172.16.1.33 any eq 22 access-list 100 permit ip any any
    line vty 0 15 ip access-group 100 in

Answer: D

 

NEW QUESTION 237
Drag and drop each characteristic of device-management technologies from the left onto the deployment type on the right.

Answer:

Explanation:

 

NEW QUESTION 238
Which two commands can you use to verify an IP SLA? (choose two)

  • A. show ip sla reaction-configuration
  • B. show ip sla configuration
  • C. show ip sla statistics
  • D. show ip sla application

Answer: B,C

 

NEW QUESTION 239
Which purpose does a northbound API serve in a controller-based networking architecture?

  • A. reports device errors to a controller
  • B. generates statistics for network hardware and traffic
  • C. facilitates communication between the controller and the applications
  • D. communicates between the controller and the physical network hardware

Answer: C

 

NEW QUESTION 240
Router R1 must send all traffic without a matching routing-table entry to 192.168.1.1. Which configuration accomplishes this task?

  • A. Option C
  • B. Option B
  • C. Option D
  • D. Option A

Answer: A

 

NEW QUESTION 241
Which command enables IPv6 forwarding on a cisco router?

  • A. ipv6 unicast-routing
  • B. ipv6 neighbor
  • C. ipv6 host
  • D. ipv6 local

Answer: A

 

NEW QUESTION 242
Drag and drop the AAA functions from the left onto the correct AAA services on the right

Answer:

Explanation:

 

NEW QUESTION 243
Refer to the exhibit.

What must be configured to enable 802.11w on the WLAN?

  • A. Enable MAC Filtering.
  • B. Set PMF to Required.
  • C. Set Fast Transition to Enabled
  • D. Enable WPA Policy.

Answer: B

 

NEW QUESTION 244
Drag and drop the AAA functions from the left onto the correct AAA services on the right

Answer:

Explanation:

 

NEW QUESTION 245
Refer to the exhibit.

Which route does R1 select for traffic that is destined to 192 168.16.2?

  • A. 192.168 26.0/26
  • B. 192.168.16.0/21
  • C. 192.168.16.0/27
  • D. 192.168.16.0/24

Answer: C

Explanation:
Explanation
The destination IP addresses match all four entries in the routing table but the 192.168.16.0/27 has the longest prefix so it will be chosen. This is called the "longest prefix match" rule.

 

NEW QUESTION 246
R1 has learned route 192.168.12.0/24 via IS-IS. OSPF, RIP. and Internal EIGRP Under normal operating conditions, which routing protocol is installed in the routing table?

  • A. Internal EIGRP
  • B. IS-IS
  • C. RIP
  • D. OSPF

Answer: A

Explanation:
Explanation
With the same route (prefix), the router will choose the routing protocol with lowest Administrative Distance (AD) to install into the routing table. The AD of Internal EIGRP (90) is lowest so it would be chosen. The table below lists the ADs of popular routing protocols.
CCNA 200-301 Dumps Full Questions - Exam Study Guide & Free 203

Note: The AD of IS-IS is 115. The "EIGRP" in the table above is "Internal EIGRP". The AD of "External EIGRP" is 170. An EIGRP external route is a route that was redistributed into EIGRP.

 

NEW QUESTION 247
Refer to exhibit. Which statement explains the configuration error message that is received?

  • A. IT is a network IP address.
  • B. The router does not support /28 mask.
  • C. It belongs to a private IP address range.
  • D. It is a broadcast IP address

Answer: D

 

NEW QUESTION 248
what happens to new traffic is sent to a destination MAC address after the MAC aging time expires?

  • A. it is dropped
  • B. it is queued
  • C. it is process-switched
  • D. it is flooded

Answer: D

 

NEW QUESTION 249
Drag and drop the TCP/IP protocols from the left onto the transmission protocols on the right

Answer:

Explanation:

 

NEW QUESTION 250

Refer to the exhibit. Which command must be executed for Gi1/1 on SW1 to passively become a trunk port if Gi1/1 on SW2 is configured in desirable or trunk mode?

  • A. switchport mode dynamic auto
  • B. switchport mode dot1-tunnel
  • C. switchport mode trunk
  • D. switchport mode dynamic desirable

Answer: A

Explanation:
Section: Network Access

 

NEW QUESTION 251
Refer to the exhibit.

If R1 receives a packet destined to 172.161.1, to which IP address does it send the packet?

  • A. 192.168.14.4
  • B. 192.168.15.5
  • C. 192.168.12.2
  • D. 192.168.13.3

Answer: A

 

NEW QUESTION 252
Refer to the exhibit. A network technician is asked to design a small network with redundancy. The exhibit represents this design, with all hosts configured in the same VLAN. What conclusions can be made about this design?

  • A. The connection between switches should be a trunk.
  • B. This design will function as intended.
  • C. The router will not accept the addressing scheme.
  • D. The router interfaces must be encapsulated with the 802.1Q protocol.
  • E. Spanning-tree will need to be used.

Answer: C

Explanation:
Each interface on a router must be in a different network. If two interfaces are in the same network, the router will not accept it and show error when the administrator assigns it.

 

NEW QUESTION 253
Refer to the exhibit.

What is the effect of this configuration?

  • A. Egress traffic is passed only if the destination is a DHCP server.
  • B. The switch discard all ingress ARP traffic with invalid MAC-to-IP address bindings.
  • C. All ARP packets are dropped by the switch
  • D. All ingress and egress traffic is dropped because the interface is untrusted

Answer: B

Explanation:
Explanation
Dynamic ARP inspection is an ingress security feature; it does not perform any egress checking.

 

NEW QUESTION 254
......

Pass Cisco 200-301 Actual Free Exam Q&As Updated Dump: https://www.prep4king.com/200-301-exam-prep-material.html

200-301 Exam Info and Free Practice Test All-in-One Exam Guide Oct-2022: https://drive.google.com/open?id=1ohdfI_XpwRY7wryJ0poDrn_07Zu9PKc1