[Oct 28, 2023] MS-720 PDF Questions and Testing Engine With 123 Questions [Q69-Q89]

Share

[Oct 28, 2023] MS-720 PDF Questions and Testing Engine With 123 Questions

Updated Exam Engine for MS-720 Exam Free Demo & 365 Day Updates


Microsoft MS-720 certification exam is designed for professionals who are responsible for voice solutions on Microsoft Teams. MS-720 exam is intended for individuals who have experience with planning, deploying, and managing voice solutions for Microsoft Teams. Microsoft Teams Voice Engineer certification exam focuses on evaluating the candidate's knowledge and skills in configuring and managing voice applications, devices, and network components.

 

NEW QUESTION # 69
You have a Microsoft Teams Phone deployment.
You are deploying Direct Routing by using a certified Session Border Controller (SBC). The FQDN of the S6C is sbcVcontoso.com. You use signaling port 5067.
You cannot place calls and receive an error message m the Microsoft Teams admin center as shown in the following exhibit.

What is a possible cause of the issue?

  • A. The Forward P-Asserted Identify (PA!) header is disabled.
  • B. The failover timer is set to 0 seconds
  • C. The Baltimore root certificate is missing on the SBC.
  • D. Location-Based Routing is enabled for the SBC

Answer: A


NEW QUESTION # 70
You have a Microsoft Teams Phone deployment. The 613 7010 5XXX phone number range is allocated to the Session Border Controller (SBQ. A user named User! is configured as shown in the following exhibit.

User1 reports that when an external caller attempts to call the phone number or User1, the external caller receives an error message.
User 1 can make outbound calls, but no caller to appears.
Which two commands should you run to resolve the issues? Each correct answer presents part or the solution.
NOTE: Each correct selection is worth one point.
A)

B)

C)

D)

E)

  • A. Option B
  • B. Option E
  • C. Option D
  • D. Option C
  • E. Option A

Answer: C,E

Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/skype/set-csonlinevoiceuser?view=skype-ps


NEW QUESTION # 71
You are optimizing a network to better support voice and collaboration workloads in Microsoft Teams.
When the users are at a specific corporate site, you need to prevent the users from adding video during calls.
Solution: You run New-CsTeamsMeetingPolicy and set the -iPVideoHode parameter to disabled.
Does this meet the goal?

  • A. No
  • B. Yes

Answer: B


NEW QUESTION # 72
Your company uses configuration profiles to manage Microsoft Teams-certified IP phones. The Standard configuration profile is applied to the IP phones.
The help desk receives reports that several user phones fail to lock automatically after the timeout period.
You need to verify whether the configuration profile is applied to the problematic phones.
Solution: From Devices in the Microsoft Teams admin center, you locate each affected phone and review the settings on the Details tab.
Does this meet the goal?

  • A. No
  • B. Yes

Answer: A


NEW QUESTION # 73
You need to connect the analog intercoms to Teams Phone.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

  • A. Create a trusted application endpoint for Teams.
  • B. Create a configuration profile for IP phones.
  • C. Register the ATAs with a Teams-certified SBC.
  • D. Enable Direct Routing to a Teams-certified SBC.
  • E. Create a resource account for each intercom.

Answer: C,D

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/direct-routing-analog-devices
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question in this case study, dick the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment and problem statements- If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.


NEW QUESTION # 74
You need to assign a phone number to User1 to meet the technical requirements.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Reference:
https://docs.microsoft.com/en-us/powershell/module/skype/set-csuser?view=skype-ps


NEW QUESTION # 75
Your company has a Microsoft Teams Phone deployment that uses Direct Routing and a single carrier.
You deploy a new Session Border Controller (SBC) that shows as healthy in the Microsoft Teams admin center.
You place a test call over the new SBC, and the call succeeds.
When you attempt to transfer the call, the transfer fails. A portion of the SIP ladder is shown in the exhibit.
(Click the Exhibit tab.)

What is a possible cause of the issue?

  • A. notify is enabled in the SIP options of the SBC.
  • B. The carrier rejects the format of the forwarded FROM number.
  • C. The Refer on the SBC is misconfigured.

Answer: A

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/troubleshoot/phone-system/direct-routing/issues-with-call-trans


NEW QUESTION # 76
You need to recommend a solution for the new United Kingdom retail site. The solution must meet the technical requirements. Which three actions should you include in the recommendation? Each correct answer presents part of the solution. NOTE Each correct selection is worth one point.

  • A. From the Microsoft Teams admin center, assign the phone numbers to the users.
  • B. From the Microsoft 365 admin center, modify the office phone numbers of the users.
  • C. From the Microsoft Teams admin center, assign a voice routing policy to the users.
  • D. From the Microsoft Teams admin center, order five user numbers.
  • E. From the Microsoft Teams admin center, assign a calling policy to the users.
  • F. From the Microsoft 36S admin center, create a support ticket to request five phone numbers.
  • G. From the Microsoft Teams admin center, modify the dial-out settings of the users.

Answer: C,D,G

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/getting-phone-numbers-for-your-users
Topic 2, Contoso
General Overview
The network contains an Active Directory forest named contoso.com that syncs to Microsoft 365 by using Azure AD Connect Domain controllers run Windows Server 2019.
Physical Locations
Contoso has offices in Toronto, New York, and London. Contoso has a manufacturing facility in Vancouver.
Contoso has a global sales team that works remotely without a physical corporate office.
Active Directory Environment
The network contains an Active Directory forest named contoso.com that syncs to Microsoft 365 by using Azure AD Connect. Domain controllers Windows Server 2019.
Microsoft Office 365
Contoso has a Microsoft 365 subscription. All users are assigned Microsoft 365 F3 licenses. Contoso uses Microsoft Exchange Online for email.
Network Infrastructure
All the offices connect to each other by using a private WAN. The Toronto office has a 1 -Gbps internet circuit and the London office has a 100-Mbps internet circuit. Internet access for all the offices is provided through the Toronto and London offices.
The remote sales team users connect to the network by using VPN connections. The remote users use various connection types, including wireless and mobile.
Skype for Business Server traffic for the remote users is routed through the VPN connections.
Telephony
Contoso uses a centralized Skype for Business Server 2015 deployment configured for disaster recovery between the Toronto and London datacenters.
Each frontend pool connects to the PSTN through a pair of managed Session Border Controllers (SBCs) that provide Enterprise Voice and dial-in conferencing.
Contoso has a Skype for Business Server Survivable Branch Appliance (SBA) and a local SBC that connect to a Primary Rate Interface (PRO in the Vancouver manufacturing facility.
Contoso has hybrid connectivity deployed between Skype for Business Server and Office 365.
All SBCs are Microsoft Teams-certified.
The returns department has an auto attendant that uses an ID of [email protected].
Planned Changes
Contoso plans to migrate all existing services from Skype for Business Server to Teams.
Direct Routing will be deployed for the existing SBCs.
Existing meeting rooms have Skype for Business Server video endpoints that are Skype for Business Server-certified. The endpoints are not Teams-certified.
You plan to use the video endpoints in Teams until the equipment is replaced with Microsoft Teams Rooms.
A limited pilot of the Teams migration and the Direct Routing deployment will occur in the Vancouver facility before deployment to the entire company.
Technical Requirements
Contoso identifies the following technical requirements:
* During the limited pilot, the media path must be optimized.
- Media flow/ for the remote sales team users must be optimized.
Contoso identifies the following technical requirements:
* During the limited pilot, the media path must be optimized.
* Media flow/ for the remote sales team users must be optimized.
* All sales team users require inbound toll free audio conferencing-
* Users in the Vancouver facility must be able to place emergency calls regardless of internet availability.
* When users in the returns department dial out, the outbound calls must display Contoso and the department's phone number.
* The video endpoints for the existing meeting rooms must be able to be used for both voice and video conferencing in Teams meetings. All sales team users require inbound toll free audio conferencing-
* Users in the Vancouver facility must be able to place emergency calls regardless of internet availability.
* When users in the returns department dial out, the outbound calls must display Contoso and the department's phone number.
* The video endpoints for the existing meeting rooms must be able to be used for both voice and video conferencing in Teams meetings.


NEW QUESTION # 77
You have a Microsoft Teams Phone deployment.
You have a cloud-only user named [email protected].
You need to enable a Direct Routing phone number for [email protected].
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:


NEW QUESTION # 78
You have a Microsoft Teams Phone deployment. The 613 7010 5XXX phone number range is allocated to the Session Border Controller (SBQ. A user named User! is configured as shown in the following exhibit.

User1 reports that when an external caller attempts to call the phone number or User1, the external caller receives an error message.
User 1 can make outbound calls, but no caller to appears.
Which two commands should you run to resolve the issues? Each correct answer presents part or the solution.
NOTE: Each correct selection is worth one point.
A)

B)

C)

D)

E)

  • A. Option B
  • B. Option E
  • C. Option D
  • D. Option C
  • E. Option A

Answer: C,E

Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/skype/set-csonlinevoiceuser?view=skype-ps


NEW QUESTION # 79
You are deploying Microsoft Teams Calling Plans to three users as shown in the following table.

You need to resolve the issues.
What should you assign to each user? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:


NEW QUESTION # 80
The network meeting settings for Microsoft Teams are configured as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation
Graphical user interface, text, application, email Description automatically generated


NEW QUESTION # 81
Your company uses Microsoft Skype for Business Server 2015 and Enterprise Voice as the PSTN solution.
You plan to migrate all users to Microsoft Teams Calling Plans.
You will decommission Skype for Business Server after the migration is complete.
You need to ensure that all the users retain their current phone number once the migration is complete. The solution must minimize the downtime of PSTN features for each user.
What should you do first?

  • A. Schedule a port order for the phone numbers of all the users.
  • B. From the Microsoft Teams admin center, order phone numbers for all the users.
  • C. Migrate all the users to Teams.
  • D. From the Microsoft 365 admin center, purchase Communications Credits for all the users.

Answer: A

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/phone-number-calling-plans/transfer-phone-numbers-to-teams


NEW QUESTION # 82
You have a Microsoft Teams Phone deployment.
You are deploying Direct Routing by using a certified Session Border ControNer CSBC). The FQDN of the SBC is sbc1.contoso.com. You use signaling port 5067.
You cannot place calls and receive an error message in the Microsoft Teams admin center as shown in the following exhibit.

What is a possible cause of the issue?

  • A. The firewall blocks traffic on pan 5067
  • B. Location-Based Routing is enabled for the SBC.
  • C. Calling plan licenses are not assigned to users.
  • D. The SIP options are disabled.

Answer: A

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/troubleshoot/phone-system/direct-routing/sip-options-tls-certificate-issues


NEW QUESTION # 83
Your company has offices in Seattle.
You deploy Microsoft Teams Phone. You have three Session Border Controller (SBCs) named SBC1, SBC2, and SBC3.
You need to configure voice routing to meet the following requirements:
All calls to area codes 425 and 206 must attempt to go to SBC1, and if SBC1 is unavailable, fail over to SBC2.
All other calls to the United States and Canada must go out through SBC2.
International calls must go out through SBC2 or SBC3.
How should you complete the PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Reference:
https://docs.microsoft.com/en-us/powershell/module/skype/new-csonlinevoiceroute?view=skype-ps


NEW QUESTION # 84
Your company uses Microsoft Teams Calling Plans.
The company acquires a small development team. Currently, users on the team have their own direct inward dial (DID) numbers that have PSTN capabilities.
You migrate the users to Teams.
You need to ensure that you have phone numbers that you can assign to the users.
Solution: From the Microsoft Teams admin center, you place a new order for user numbers.
Does this meet the goal?

  • A. No
  • B. Yes

Answer: A


NEW QUESTION # 85
You are replacing the on-site PBX at the Georgia warehouse with Teams.
You need to maintain the functionality of the PBX after migrating to Teams.
Which sequence of steps should you perform? To answer, drag the appropriate steps to the correct locations.
Each step may be used once, more than once, or not at all You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation
Graphical user interface, text, application, chat or text message Description automatically generated

Reference:
https://docs.microsoft.com/en-us/microsoftteams/manage-emergency-calling-policies


NEW QUESTION # 86
You have a Microsoft Teams Phone deployment.
When you attempt to deploy a Session Border Controller (SBC) named sfac1xontoso.com. you receive the following error message: "We cant use the "SBCl-Contoso.com" domain as it hasn't been set up in the organization. Try agaax. If you continue to have problems, contact Microsoft customer support." You need to add the SBC to the tenant.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:


NEW QUESTION # 87
You have a Microsoft Teams Phone deployment.
You are deploying Direct Routing.
All users have a SIP URI in the format of [email protected]. The Session Border Controller (SBC) is named sbc.voice.contoso.com.
When troubleshooting errors on the SBC, you receive the warning shown in the following exhibit.

What is a possible cause of the issue?

  • A. Microsoft 365 Phone System licenses are not assigned to the users.
  • B. The certificate does not match the FQDN on the SBC.
  • C. The firewall blocks inbound traffic on port 443 to the SBC.
  • D. Only TLS 1.0 is enabled on the SBC.

Answer: B

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/troubleshoot/phone-system/direct-routing/sip-options-tls-certifi


NEW QUESTION # 88
Exhibit

Your company has a Microsoft Teams Phone deployment that uses Direct Routing.
A user named User1 reports that she cannot make calls because the dial pad n missing in Teams.
You run the Get-CsOnlineUser cmdlet and receive the output shown in the exhibit (Click the Exhibit tab.) Which three actions should you perform to ensure that the dial pad appears in the Teams client? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

  • A. Run the set-CsUsre cmdlet and specify the -LineURI parameter.
  • B. Run the set-csPhoneNumberAssignment cmdlet and specify the -PhonNumber parameter.
  • C. Assign a Microsoft Teams Phone Standard license to User1.
  • D. Run the set-csuser cmdlet and set the -enterprisevoiceenabled parameter to $True.
  • E. Run theGrant-CsOnlineVoiceRogtinfPolicy cmdlet

Answer: C,D,E


NEW QUESTION # 89
......

Exam Passing Guarantee MS-720 Exam with Accurate Quastions: https://www.prep4king.com/MS-720-exam-prep-material.html

Test Engine to Practice Test for MS-720 Valid and Updated Dumps: https://drive.google.com/open?id=1s1MArMNHA6uJCi1EUJ9e1sGnD3Vhh9Pg