Latest Cisco 300-820 Free Certification Exam Material with 157 Q&As [Q37-Q60]

Share

Latest Cisco 300-820 Free Certification Exam Material with 157 Q&As 

UPDATED 300-820 Exam Questions Certification Test Engine to PDF

NEW QUESTION # 37
Which step is taken when configuring a Cisco Expressway solution?

  • A. Disable H.323 mode on the Expressway-E.
  • B. Enable static NAT on the Expressway-E only.
  • C. Configure the Expressway-E by using a non-traversal server zone.
  • D. Enable H.323 H.460.19 demultiplexing mode on the Expressway-C.

Answer: B


NEW QUESTION # 38
Refer to the exhibit.

Which description of the transformation is true?

Answer: A


NEW QUESTION # 39
Where are voice calls handled in a Cisco Jabber hybrid cloud-based deployment with Cisco Webex Platform Service?

  • A. Voice calls use local media nodes to keep traffic internal for internal traffic and use Webex Calling for external calls.
  • B. Voice calls use local Cisco Unified Communications Manager for all calls.
  • C. Voice calls use Webex Calling platform for call control and use hybrid media nodes for local conferencing.
  • D. Voice call use Cisco Unified Communications Manager for local calls and Webex Calling for external calls.

Answer: B


NEW QUESTION # 40
Refer to the exhibit.

If the Webex Teams device cannot connect to Video Mesh Cluster-1 because it is busy, which media node does the Webex Teams device connect to next?

  • A. Both Cloud Node US-EAST and US-WEST
  • B. Video Mesh Cluster-2
  • C. Cloud Node US-WEST
  • D. Cloud Node US-EAST

Answer: B


NEW QUESTION # 41
Which two statements about Mobile and Remote Access certificate are true? (Choose two.)

  • A. Expressway must generate certificate signing request.
  • B. Expressway Core can use private CA signed certificate.
  • C. You must upload the root certificates in the phone trust store.
  • D. Expressway Edge must use public CA signed certificate.
  • E. The Jabber client can work with public or private CA signed certificate.

Answer: B,E


NEW QUESTION # 42
Which describes what could done on the Expressway-E to successfully route calls from Expressway-C on the internal network to the Internet?

  • A. The Expressway-E could be enabled for interworking.
  • B. Application layer gateway could be enabled to bridge the media traffic.
  • C. The Expressway-E could be enabled for Dual-NIC capability.
  • D. A static NAT route could be added to the firewall to bridge the two networks.

Answer: C


NEW QUESTION # 43
Refer to the exhibit.

When a Jabber user attempts to connect from outside of the organization, the user enters the login information as "[email protected]" and receives the error "Cannot find your services Automatically". The engineer tries to resolve SRV records used by Jabber.
DNS A record "expressway-e.example.com" points to the Expressway-E IP and "cucm.example.com" points to the Cisco Unified Communications Manager.
Which change resolves the DNS problem?

  • A. Change the collab-edge record to point to 5061.
  • B. Remove the cisco-uds SRV record for the external DNS.
  • C. Change the priority of the SRV record for cisco-uds.
  • D. Change cisco-uds to point to the Expressway-E FQDN.

Answer: B


NEW QUESTION # 44
An Expressway-E is configured using a single NIC with NAT.
How must the Expressway-C traversal client zone be configured to connect to the Expressway-E?

  • A. The peer address must be the Expressway-E LAN 1 IP address.
  • B. The peer address must be the Expressway-E NAT address.
  • C. The zone profile must be set to default.
  • D. TLS verify must be enabled.

Answer: A


NEW QUESTION # 45
For a Mobile and Remote Access deployment, which server's certificate must include the Unified registration domain as a Subject Alternate Name?

  • A. Expressway-E server certificate
  • B. Cisco Unified Communications Manager server certificate
  • C. Expressway-C server certificate
  • D. Expressway-C and Expressway-E server certificate

Answer: A

Explanation:
Explanation
https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-7/Mobile-Remote-Ac


NEW QUESTION # 46
An administrator configures a secure SIP trunk in Cisco UCM to Expressway-C. The SIP trunk fails to become active, and an examination of a packet capture finds that the TLS handshake failed with a "Certificate Unknown" error from Cisco UCM. To allow the Cisco UCM to trust the Expressway-C and establish a TLS connection, the administrator will upload the Expressway server certificate to the trust store. To which trust store must the certificate be uploaded?

  • A. tomcat-trust
  • B. TVS-trust
  • C. CallManager-trust
  • D. ipsec-trust

Answer: C


NEW QUESTION # 47
An administrator must configure the DNS SRV records for Mobile and Remote Access for a company with the domain example.com, the Expressway-E FQDN is ExpE.example.com, and the Expressway-C FQDN is Exp-C.example.com. What must the administrator configure to allow external clients to discover the Expressway-E server?

  • A. SRV record _cisco-uds._tcp.example.com that resolves to ExpC.example.com on port 8443
  • B. SRV record _collab-edge._tls.example.com that resolves ta ExpE.example.com on port 5061
  • C. SRV record _cisco-uds._tcp.example.com that resolves to ExpE.example.com on port 5061
  • D. SRV record _collab-edge._tls.example.com that resolves to ExpE.example.com on port 8443

Answer: D

Explanation:
To allow external clients to discover the Expressway-E server, the administrator must configure the SRV record _collab-edge._tls.example.com that resolves to ExpE.example.com on port 8443.
This SRV record is used for Mobile and Remote Access to allow external clients to connect securely to the Expressway-E server. The _collab-edge._tls prefix is used to identify the service as a "collaboration edge" service and the .example.com suffix is the domain name for the organization. Port 8443 is the default port used for secure HTTPS connections to the Expressway-E server.


NEW QUESTION # 48
A Jabber user is being prompted to trust the Expressway-E certificate when using Mobile and Remote Access.
The administrator has validated that the Expressway-E certificate is being trusted by the machine running the Jabber client.
What else can be done to solve this problem?

  • A. Create a new CSR with new information on the SAN field.
  • B. Change the FQDN of the Expressway.
  • C. Change the domain name.
  • D. Include Cisco Unified Communications Manager registration domain in the Expressway-E certificate as a SAN.

Answer: D


NEW QUESTION # 49
Which two statements about Mobile and Remote Access certificate are true? (Choose two.)

  • A. You must upload the root certificates in the phone trust store.
  • B. Expressway must generate certificate signing request.
  • C. Expressway Edge must use public CA signed certificate.
  • D. The Jabber client can work with public or private CA signed certificate.
  • E. Expressway Core can use private CA signed certificate.

Answer: B,C


NEW QUESTION # 50
Refer to the exhibit. An engineer is deploying mobile and remote access in an environment that already had functioning Business to Business calling. Mobile and remote access SIP registrations are failing.
To troubleshoot, SIP logs were collected. How is this issue resolved?

  • A. Write a custom normalization script since the "vcs-interop" normalization script does not allow registrations
  • B. Change the SIP profile on the SIP trunk for the Expressway-E to Standard SIP Profile for TelePresence Endpoint
  • C. Enable autoregistration for the appropriate DN range on the Cisco UCM servers running the CallManager service
  • D. Change the "Incoming Port" in the SIP Trunk Security Profile for the Expressway-C to not match SIP line registrations

Answer: D

Explanation:
In order to correct this issue, change the SIP port on the SIP Trunk Security Profile that is applied to the existing SIP trunk configured in CUCM and the Expressway-C neighbor zone for CUCM to a different port such as 5065.


NEW QUESTION # 51
Refer to the exhibit. Cisco Unified Communications Manager routes the call via the Webex Meetings route list and route group to the Video Mesh cluster Node#1 in the Video Mesh cluster is hosting the meeting and has reached full capacity, but other nodes in the cluster still have spare capacity.

What happens to the participant's call?

  • A. Another node in the cluster is used and an intra-cluster cascade between the two Video Mesh nodes is formed.
  • B. The call fails.
  • C. Another node in the cluster is used and an intra-cluster cascade between Webex and the new Video Mesh node is formed.
  • D. The call is queued.

Answer: A

Explanation:
If the node hosting the meeting reaches full capacity, another node in the cluster will be used and an intra-cluster cascade will be formed. (The intra-cluster cascade routes from node to node, not via Webex.)
https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Collaboration/hybrid/12x/hybcvd/hms.html


NEW QUESTION # 52
A call is sent by Cisco UCM to Expressway with a URI of [email protected]. If (7508...) @expc1a\.pod8\.test\.lab.* is the pattern string, what would be the replacement string of the transform in Expressway to re-write the call so that it becomes
[email protected]?

  • A. \1@conf\.pod8.test.lab.@
  • B. \[email protected]\.test\.lab
  • C. \1@conf\.pod8\.test\lab.*
  • D. \1@conf\.pod8\.test.lab.!

Answer: B


NEW QUESTION # 53
Which step is required when configuring Cisco Webex Hybrid Message Service?

  • A. Register Expressway-C Connector Hosts to the Cisco Webex Cloud.
  • B. Register Expressway-C to Cisco Unified Communications Manager.cisco
  • C. Add Expressway-C and Cisco United CM to the Cisco Webex Cloud.
  • D. Add Cisco Unity Connection to Expressway-E.

Answer: A

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cloudCollaboration/spark/hybridservices/messageservice


NEW QUESTION # 54
An engineer is deploying an Expressway solution for the SIP domain Cisco.com. Which SRV record should be configured in the public DNS to support inbound B2B calls?

  • A. _sip._tcp.cisco.com
  • B. _collab-edge._tls.cisco.com
  • C. _cisco-uds._tcp.cisco.com
  • D. _cuplogin._tcp.cisco.com

Answer: A

Explanation:
Reference:
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2018/pdf/BRKCOL-2018.pdf


NEW QUESTION # 55
Which two licenses are required for the B2B feature to work? (Choose two.)

  • A. TURN Relays
  • B. Device Provisioning
  • C. Advanced Networking
  • D. Rich Media Sessions
  • E. Traversal Server

Answer: D,E


NEW QUESTION # 56
Which SIP media encryption mode is applied by default for newly created zones in the Cisco Expressway?

  • A. C.......
  • B. Force Encrypted
  • C. Auto
  • D. Best Effort

Answer: C


NEW QUESTION # 57
When designing the call control on a Cisco Expressway Core, which is the sequence of dial plan functions?

  • A. DNS zone, local zone, search rules
  • B. search rules, zones, local zones
  • C. transforms, CPL, user policy, search rules
  • D. search rules, transforms

Answer: D

Explanation:
Explanation
https://community.cisco.com/t5/collaboration-voice-and-video/vcs-dial-plan-example-configuration-to-avoid-int


NEW QUESTION # 58
An administrator installs a new webserver (server1.example.com - 10.1.1.90) for storing Cisco Jabber update files to the network, but all Mobile and Remote Access registered clients still run the old Jabber software version, and the update fails. Which configuration task on an Expressway server solves the Jabber software update issue?

  • A. Add a rule with the URL http://server1.example.com:80/ to the inbound HTTP allow list manually to allow access to the new web server.
  • B. Add a rule with the URL http://server1.example.com:80/ to the outbound HTTP allow list manually to allow pushing the new software to the clients.
  • C. Run an IM and Presence server discovery process on Expressway-C to add the new web server to the inbound HTTP allow list automatically.
  • D. Add a rule with the server IP address 10.1.1.90 in the URL to the inbound HTTP allow list because server names and FQDNs are not supported.

Answer: A


NEW QUESTION # 59
Which mode should be used when Call Policy is configured on Expressways?

  • A. local CPL, policy service, and off
  • B. on
  • C. remote CPL
  • D. extended CPL

Answer: A


NEW QUESTION # 60
......


Cisco 300-820 exam is an essential certification for professionals who want to advance their career in the field of Cisco Collaboration Cloud and Edge Solutions. Implementing Cisco Collaboration Cloud and Edge Solutions certification validates the candidate's knowledge and skills in implementing various Cisco collaboration solutions, which are in high demand in today's digital world.

 

Get The Important Preparation Guide With 300-820 Dumps: https://www.prep4king.com/300-820-exam-prep-material.html

Get Totally Free Updates on 300-820 Dumps PDF Questions: https://drive.google.com/open?id=1qYnrFIgYaarz1-Ntx_srZeRtHxLA7tit