[Jan-2022] Feel F5 301a Dumps PDF Will likely be The best Option
301a exam torrent F5 study guide
How much F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam Cost and Details
Examination Name F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam Passing Score: 260 Length of Exam: 95 min Types of questions: Multiple Choice Questions No. of Questions: 82 Questions Examination Fees: $175 USD
Certification Path of F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam
The second test is F5 301a. Candidates who complete the course successfully will be F5 Certified! BIG IP status, Administrator. This test would assist the student in comprehending how a packet is handled after it arrives at the computer (connection table, packet filters, etc.). Learn how a virtual server responds to an order. Isolate where the problem may be based on the processing order if you have a complex connection question. Determine a virtual server’s current condition. Check to see whether a virtual server is listening on the correct port. Check to see whether a virtual machine is installed with the correct IP address. Check to see whether the virtual server is set up with the right profiles.
Specialist, F5 BIG-IP Local Traffic Manager (LTM): Maintain & Troubleshoot The F5 Certified Technology Specialists Certification is linked to the 301a Exam. This 301a Exam verifies the abilities to plan, execute, manage, and troubleshoot advanced F5 product functionality in order to improve the effectiveness of an Application Delivery Network. This 301a exam also assesses candidates' abilities to apply their knowledge of underlying concepts, such as SSL-based VPN deployment and symmetric or asymmetric acceleration, to incorporate Local Traffic Manager into current networks as well as new implementations. The terms “network administrator” and “network engineer” are interchangeable. Typically, you should expect the same work positions after completing this degree whether you retain or seek it.
NEW QUESTION 39
Refer to the following iRule:
What is a complete list of profiles that must be applied to the virtual server for this iRule?
- A. Fast L4 , HTTP, Stream
- B. TCP, HTTP, Client SSL
- C. Fast L4, HTTP
- D. TCP, HTTP
Answer: D
NEW QUESTION 40
An LTM Specialist needs to configures virtual server that uses PVA or OPVA Which virtual server type should be used?
- A. Performance (Layer 4)
- B. Stateless
- C. Performance (HTTP)
- D. Standard
Answer: A
NEW QUESTION 41
Refer to the exhibit.
The http monitor is applied to a pool. All members are enabled. One server responds as follows.
What is the resulting status of this poo! member?
- A. Available (Enabled)
- B. Offline (Disabled)
- C. Unavailable (Disabled)
- D. Offline (Enabled)
Answer: D
Explanation:
The first picture "Send String" and "Receive String" are not clear. Send String should be "GOOD", the response packet does not contain this keyword. Receive Disable String is completely unclear. If the response packet contains the content of Receive Disable String at this time, it will be Available (Disabled), If the content of Receive Disable String is not included, then Offline (Enabled).
NEW QUESTION 42
An LTM Specialist needs to apply SNAT using currently used SNAT pool to a new virtual server.
What needs to be completed before applying that configuration change?
- A. Review connection for the selected SNAT pool and enlarge it if appropriate
- B. Verify that the IP address of the SNAT pool are in the same VLAN as the pool members.
SNAT does not need to in the same vlan or same network segment as the pool member, as long as the route is reachable , excluding C and D he connection information of the SNAT pool to avoid port exhaustion under high concurrency - C. Verify that the IP address of the SNAT pool are in the same subnet as the pool members
- D. Make sure that the BIG-IP device is NOT operating under heavy load during peak times
Answer: A
NEW QUESTION 43
Refer to the Exhibit.
An LTM Specialist notices that two members in a pool are overloaded. To relive the existing members a fourth member (10.128.20.14) is brought up.
How many member will receive and process new connections?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 44
An LTM Specialist must reconfigure a BIG-IP LTM system that load balances traffic to web application servers. The application developer inform the LTM Specialist that TLS must be used to communicate with the application servers.
Which additional profile is required as part of virtual server configuration?
- A. Rewrite profile
- B. SPDV profile
- C. Server SSL
- D. Client SSL
Answer: C
NEW QUESTION 45
Traffic to a pool of SFTP servers that share storage must be balanced by an LTM device.
What are the required profile and persistence settings for a standard virtual server?
- A. tcp - no persistence profile will be used
- B. tcp, clientssl, serverssl persistence
- C. tcp, ctientsst, ftp serverssl persistence
- D. tcp, ftp - Source address persistence
Answer: D
NEW QUESTION 46
A virtual server configuration for traffic destined to a server is as shown:
HTTP traffic is destined to the 10 10.20.1 server from the source
Based on precedence, which virtual server accepts this traffic?
- A. MyvS1
- B. MyVS3
- C. MyVS2
- D. MyVS4
Answer: C
NEW QUESTION 47
An SSL application is being migrated to the LTM device. Both encrypted and unencrypted traffic are accepted by the server. The virtual server configuration is as follows:
Which LTM device profile should be used on the LTM device to reduce the CPU load on the current.
- A. Protocol
- B. clientsssl
- C. stream
- D. serverssl
Answer: B
NEW QUESTION 48
An LTM Specialist needs to use the tmsh command to create a pool named http_pool with member
10.10.101:80 on an LTM device.
Which expression should the LTM Specialist use?
- A. # tmsh create it pool http_pool members {10.10.10.101:80}
- B. # tmsh create pool http_pool members {10.10.10.101:80}
- C. # tmsh create pool http_pool members add {10.10.10.101:80}
- D. # tmsh create itm pool http_pool member {10.10.10.101:80}
Answer: A
Explanation:
The option should be wrong, it should ne itm instead of it, the correct command is:tmsh create itm pool http_pool members add (10.10.10.101:80}
NEW QUESTION 49
Six servers have a varying number of connections that change based on the user load.
Which load balancing method should an LTM Specialist apply to divided the web application traffic to the servers on the relative performance trend?
- A. Least Connections
- B. Predictive
- C. Least Sessions
- D. Ratio
Answer: B
NEW QUESTION 50
set payload {CACHE :: payload}
}
Which two profiles should be used on the virtual server? (Choose two.)
- A. http
- B. http-transparent
- C. http compression
- D. stream
- E. webacceleration
Answer: A,E
NEW QUESTION 51
An LTM Specialist needs to create an iRule that creates persistence records based on a JSESSIONID cookie. If a persistence record already exists, then the iRule must persist the client connection according to the existing record.
Which persistence profile enables the iRule to meet these requirements?
- A. Destination Address Affinity
- B. Cookie
- C. Source Address Affinity
- D. Universal
- E. SSL
Answer: D
NEW QUESTION 52
An LTM Specialist plans to enable connection mirroring for a virtual server in an HA environment.
What must the LTM Specialist consider before implementing the configuration change?
- A. Creating the required separate interface for connection mirroring
- B. Decreased number of possible concurrent connections to that virtual server
- C. Impact on system performance that might be noticeable
- D. The add-on license that is required for this feature to be available
Answer: C
Explanation:
Connection mirroring will bring performance consumption
NEW QUESTION 53
An TLM Specialist has an Exchange that must use the LTM device to route traffic to the internet.
Which SNAT/NAT configure allows the Exchange server's traffic access the internet through the LTM device?
- A. SNAT List
- B. SNAT Pool
- C. NAT
- D. SNAT Automap
Answer: A
NEW QUESTION 54
Refer to the exhibit.
The http monitor is applied to a pool All members are enabled One pool member stops responding TCP port 80. The server still responds to ping.
What is the resulting status of this pool member?
- A. Available (Enabled)
- B. Unknown (Enabled)
- C. Offline (Disabled)
- D. Unavailable (Disabled)
Answer: A
NEW QUESTION 55
An LTM Specialist needs to create two virtual servers.
The application has links for both HTTP and HTTPS version of application. The client must be persistence to a pool member, no matter which virtual server is accessed.
What must be selected in the Source Address Affinity persistence profile?
- A. Match across Services
- B. Match across Polls
- C. Match across Pool Members
- D. Match across Virtual Servers
Answer: D
NEW QUESTION 56
An LTM Specialist is removing some of the load off an existing cluster by adding a adding a third BIG-IP device to the device group. The new device can deliver twice the performance of the other two devices.
The LTM Specialist needs to make sure that the BIG-IP device with the highest available capacity is always selected to take over a traffic group in the event of a failover.
Which failover method is most appropriate?
- A. HA Group
- B. Load Aware
- C. HA Capacity
- D. Ordered List
Answer: D
NEW QUESTION 57
AN LTM Specialist needs to determine the delay between an LTM device and the internal web server for a specific client.
Which two AVR reporting options should the LTM Specialist enable to measure the delay? (Choose two.)
- A. Server latency
- B. Methods
- C. User agents
- D. Client IP
The problem is to specify the server delay of the client - E. Response codes
Answer: A,D
NEW QUESTION 58
An HA pair of LTM devices that load balance multiple HTTPS applications utilizes highly customized RAM Cache and compression profiles on each virtual server. The LTM Specialist who is administering the HA pair regularly observes entines in the log similar to the following:
tmm tmm I708S1 011e0002.4. sweeper_update: aggressive mode activated (117504/138240 pages) No DoS attacks arc occurring. No user problems have been reported. Which step should the LTM Specialist take to help mitigate the issue?
- A. change the Adaptive Reaping Low watermark
- B. use a OneConnect profile
- C. change the Adaptive Reaping High watermark
- D. allocate less memory to the RAM cache feature
Answer: A
NEW QUESTION 59
Exhibit.
- The ITM devices LTM 1 and LTM2 are configured in Device Group X (Sync-Failover)
- LTM3 and LTM4 are configured in Device Group Y (Sync-Only)
- An LTM specialist configures Device Group Z (Sync-Only) to keep several profiles in (sync-Only) to keep several profiles in sync across all devices.
- Device GROUP X has four Traffic Groups A, B, C and D configured.
- Device Group Y has four Traffic Groups E, F, G, and H configured
- Auto Fallback IS NOT Enabled.
- Each Device group is healthy and able to pass traffic for any traffic group assigned to that Device Group.
The data center that contains LTM2 and LTM4 loses power. After 10 minutes; power is restored and all devices are up and healthy.
What is the state of each Traffic Group on each ITM device after power is restored?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: C
NEW QUESTION 60
An LTM device receives a response string containing "error"
Which monitor type and parameter will mark the HTTP server as down?
- A. HTTP monitor and Receive Disable String "error'' .... flag is disable
- B. HTTP monitor. Receive String "down", and set the Reverse option to Yes .... flag is
- C. HTTP monitor, Receive String "error", and set the Reverse option to Yes
- D. HTTP monitor and Receive String "error'' ... flag is up
Answer: C
NEW QUESTION 61
AN LTM Specialist is using an external monitor evaluate the hard drive usage of a node. The monitor has marked the node down because it exceeded the specific threshold. The disk usage on the server has been corrected below the threshold, however, the node remains offline.
Which feature is causing this problem?
- A. The value for UP interval is enable with a value greater than 0
- B. The value for Manual Resume is set to Yes
- C. The parameter Time Until UP has a value greater than 0
- D. The value of Manual Resume is set to No
Answer: B
NEW QUESTION 62
......
F5 301a Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
Use Valid New 301a Test Notes & 301a Valid Exam Guide: https://www.prep4king.com/301a-exam-prep-material.html
301a Actual Questions Answers PDF 100% Cover Real Exam Questions: https://drive.google.com/open?id=1a-GjrdVs4CV8hF9w1eWrfKIE05YiidJ0
