[Jan 14, 2023] Prep4King 1z0-996-22 dumps & Oracle Utilities Customer Cloud sure practice dumps
Oracle 1z0-996-22 Actual Questions and Braindumps
NEW QUESTION 29
Which configuration steps are required to derive loss-adjusted kWh on a measuring component based on a loss factor value related to a service point?
- A. Configure a factor and derivation algorithm, and then associate the factor to the Measuring Component Type and the derivation algorithm to the service point.
- B. Configure a Service Point Characteristic Type, factor, derivation algorithm, and Service Quantity Identifier (SQI), and then associate the SQI and derivation algorithm to the Measuring Component Type and the characteristic value to the service point.
- C. Configure a Service Point Characteristic Type and derivation algorithm, and then associate the algorithm to the Measuring Component Type and the characteristic value to the service point.
- D. Configure a factor and derivation algorithm, and then associate both to the Measuring Component Type and service point.
- E. Configure an SQI and the derivation algorithm, and then associate the algorithm to the Measuring Component Type and SQI to the service point.
Answer: E
NEW QUESTION 30
Which entity defines the type of collection process to start based on age of debt, amount of debt, and type of customer?
- A. Collection Process Template
- B. Debt Class
- C. Collection Class Control
- D. Customer Class
- E. Collection Class
Answer: B
NEW QUESTION 31
In addition to sets of procedures, and careful handling instructions for hazardous or delicate materials, what can Specifications include to provide information about assets or other entities?
- A. Conditions
- B. Attributes
- C. Specifications
- D. Rules
Answer: C
NEW QUESTION 32
There has been a meter exchange at a service point in the past year.
How many installation events exist for the service point for the past year?
- A. One
- B. Three
- C. Two
- D. None
- E. Four
Answer: A
NEW QUESTION 33
On which three entities can proration be disabled? (Choose three.)
- A. Calculation Rule
- B. Bill Factor
- C. Calculation Rule Business Object
- D. Rate Version Calculation Group
- E. Rate Schedule
Answer: C,D,E
NEW QUESTION 34
As part of the service order processing, the algorithm D1-CNSPINSDV (Connect SP and/or Install Device) determines if a specific activity needs to be created based on the state of the service point.
Based on the status of the service point, what can this algorithm create?
- A. Device Configuration
- B. Device
- C. Service Point
- D. Smart Meter Command
Answer: C
NEW QUESTION 35
How many service agreements are linked to a severance process?
- A. any number defined by the business user
- B. all service agreements that are connected to the initiating overdue process
- C. zero - accounts are linked to severance processes
- D. all service agreements that are connected to the initiating collection process
- E. one
Answer: A
NEW QUESTION 36
Your client has installed scalar devices to measure the solar energy generated (Export) and the energy received (Import) from the National Grid. This data is stored in separate measuring components (registers).
The validation rules are generally the same for both measuring components, but there is one exception. The Negative Consumption check applies only to energy received (import).
Which two are possible configurations resulting in the Negative Consumption rule being checked for energy received (import) only? (Choose two.)
- A. Use the Skip Flag in the VEE rule.
- B. Remove the Negative Consumption check from the VEE group.
- C. Use Eligibility Criteria.
- D. Create two different VEE groups.
- E. Modify the base VEE rule.
Answer: C,D
NEW QUESTION 37
Which three statements are correct for Adjustment Types? (Choose three.)
- A. They control the valid Service Agreement Types that adjustments can be linked to.
- B. They control the valid Adjustment Profiles that adjustment types can belong to.
- C. They control whether a rate is to be called to calculate an adjustment amount.
- D. They control how adjustments appear on bills.
- E. They can default an Adjustment Amount to adjustments.
Answer: A,C,D
NEW QUESTION 38
If a customer makes a payment for more than what is due for the account, which entity contains the logic for how this overpayment should be handled?
- A. Pay Segment Type
- B. Customer Class
- C. Installation Options
- D. Tender Type
- E. Service Agreement Type
Answer: B,C,E
NEW QUESTION 39
Which option correctly describes the high-level process from loading measurements through calculating usage?
- A. 1. Load Initial Measurements
2. Validate, edit, and estimate Initial Measurements
3. Create Final Measurements
4. Update Initial Measurements - B. 1. Load Initial Measurements
2. Validate, edit, and estimate Initial Measurements
3. Create Final Measurements
4. Calculate Usage - C. 1. Load Initial Measurements
2. Verify, evaluate, and enter Initial Measurements
3. Create Final Measurements
4. Calculate Usage - D. 1. Load Initial Measurements
2. Validate, evaluate, and estimate Initial Measurements
3. Update Initial Measurements
4. Calculate Usage
Answer: C
NEW QUESTION 40
Which two are "Are SP and Device Ready?" state algorithms for Enable Service? (Choose two.)
- A. Start Service Agreement
- B. Check for Measurement
- C. Create Service Point
- D. Customer Device Compatibility Check
- E. Create Usage Subscription
Answer: B,D
NEW QUESTION 41
Within the application, operational devices can be assets or components.
Which two statements are true about components? (Choose two.)
- A. Components are attached to assets.
- B. Components can't have specifications.
- C. Components are not a class of assets.
- D. Components have a disposition that tracks their location and status.
- E. Components can be installed at locations.
Answer: A,E
NEW QUESTION 42
Measuring components are either subtractive or consumptive.
Which statement correctly describes these two concepts?
- A. A subtractive measuring component's consumption for a given period of time is the end measurement minus the start measurement. A consumptive measuring component's consumption is simply the measurement itself, and represents the consumption for the period of time since the previous measurement was taken.
- B. Subtractive measuring components are used to measure demand, whereas consumptive measuring components are used to measure how much was consumed since the previous reading.
- C. Subtractive measuring components are associated only with water service, whereas consumptive measuring components are for gas and electric services.
- D. Subtractive measuring components are associated with deductive meters, whereas consumptive measuring components are not.
Answer: B
NEW QUESTION 43
Your customer's initial measurement data (IMD) has been imported and can be viewed through the Measuring Component portal, but is not in the "Final" measurement status.
What can you assume that the IMD has passed?
- A. Multiplier Check Validation
- B. Sum Check Validation
- C. Critical Validation, High/Low Check Validation, and Sum Check Validation
- D. Critical Validation
- E. High/Low Check Validation
Answer: A
NEW QUESTION 44
What determines an Account's Balance?
- A. the sum of all the balances recorded in the "Balance Due" field on each service agreement related to the account
- B. the amount recorded in the "Balance Due" field on an account
- C. the logic defined in a plug-in spot on the Installations Option
- D. the sum of all the Financial Transactions linked directly to the account
- E. the sum of all the Financial Transactions linked directly to the service agreements related to the account
Answer: D
NEW QUESTION 45
Which three are important Account concepts that must always be followed? (Choose three.)
- A. An Account can only reference one and only one person at one time.
- B. An Account references one or more persons.
- C. Every Account has a unique, system-assigned Account ID.
- D. Bills are produced for an account and are sent to the account persons.
- E. Accounts expire when there are no active contracts.
Answer: A,C,D
NEW QUESTION 46
When a service agreement is created, it is based on a template called the Service Agreement Type (SA Type) and values may be defaulted from a Start Option.
Which three attributes can get defaulted from a Start Option? (Choose three.)
- A. Contract Quantities
- B. Terms and Conditions
- C. CIS Division
- D. Service to be billed
- E. Rate
Answer: A,B,D
NEW QUESTION 47
......
Oracle 1z0-996-22 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
Latest 1z0-996-22 Pass Guaranteed Exam Dumps with Accurate & Updated Questions: https://www.prep4king.com/1z0-996-22-exam-prep-material.html
Pass 1z0-996-22 Exam with Updated 1z0-996-22 Exam Dumps PDF 2023: https://drive.google.com/open?id=1J-lUKwaY5dOOXCow5hWwX4gP1Hn5oxLL
