2024 Easily pass JN0-363 Exam with our Dumps & PDF Test Engine
JN0-363 PDF Pass Leader, JN0-363 Latest Real Test
Juniper JN0-363 exam is an important certification exam for individuals who want to specialize in service provider routing and switching. JN0-363 exam covers a range of topics related to Juniper Networks devices and requires candidates to have a solid understanding of networking concepts and protocols. Earning the JNCIS-SP certification can provide individuals with several benefits, including increased job opportunities and earning potential.
The JN0-363 exam is an important certification for professionals who are looking to advance their careers in the service provider industry. Service Provider Routing and Switching, Specialist (JNCIS-SP) certification demonstrates that the candidate has a strong understanding of various routing and switching technologies, and is able to apply this knowledge to design and maintain a service provider network. Service Provider Routing and Switching, Specialist (JNCIS-SP) certification is also valuable for organizations that are looking to hire professionals with specialized skills in service provider routing and switching.
NEW QUESTION # 33
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The OSPF neighbor will be declared down if 500 BFD hello packets are missed
- B. The OSPF neighbor will be declared down if BFD hello packets are not received for 5 seconds
- C. The OSPF neighbor will be declared down if three BFD hello packets are missed
- D. The OSPF neighbor will be declared down if BFD hello packets are not received for 1.5 seconds
Answer: C,D
NEW QUESTION # 34
Routers R1 and R4 have a VRRP priority of 90, while R2 and R3 have default VRRP priorities Referring to the exhibit, which router will be elected as the primary VRRP router?
- A. R3
- B. R1
- C. R4
- D. R2
Answer: B
NEW QUESTION # 35
Click the Exhibit. You are receiving the same route prefix from four EBGP neighbors.
Based on the information provided in the exhibit, which route will be selected?
- A. Route 3
- B. Route 4
- C. Route 1
- D. Route 2
Answer: A
NEW QUESTION # 36
Exhibit
Referring to the exhibit, how do you verify the status of the tunnel from R1?
- A. Issue the ping 172.20.111.10 source 198.51.100.1 command.
- B. Issue the ping 172.20.iii.io source 203.0.113.2 command.
- C. Issue the ping 172.20.111.10 source 172.20.110.1 command.
- D. Issue the ping 172.20. Ill. 10 command.
Answer: B
NEW QUESTION # 37
You are bringing a new network online with three MX Series devices enabled for STP. No root bridge priority has been configured. Which statement is true in this scenario?
- A. The device with the lowest numerical lo0 IP address will be elected as the root bridge.
- B. The device with the highest MAC address will be elected as the root bridge.
- C. The device with the highest numerical lo0 IP address will be elected as The bridge.
- D. The device with the lowest MAC address will be elected as the root bridge.
Answer: D
Explanation:
https://supportportal.juniper.net/s/article/EX-Identify-the-Root-Bridge-in-a-Spanning-Tree-STP-network?language=en_US The root bridge in a spanning-tree network is the bridge with the smallest or the lowest bridge ID.
NEW QUESTION # 38
Click the Exhibit.
Referring to the configuration shown in the exhibit, which statement is true?
- A. Traffic destined to address 192.168.5.1 will alternate between next-hops 172.16.1.2 and 172.16.1.3
- B. Traffic destined to address 192.168.5.1 will take next-hop 10.0.1.1.
- C. Traffic destined to address 192.168.5.1 will take next-hop 172.16.1.2.
- D. Traffic destined to address 192.168.5.1 will take next-hop 172.16.1.3.
Answer: D
NEW QUESTION # 39
You have created a routing instance named vr3 that will provide access to Server 2 (10.0.0.2) (or the hosts on the 10.10.10.0/24 network. Which command would you use to test connectivity between vr3 and Server 2?
- A. user9router1> ping 10.0.0.2 count 5
- B. user@vr3> ping 10.0.0.2 count 5
- C. user@router1> ping 10.0.0.2 routing-instance vr3 count 5
- D. user@vr3> ping 10.0.0.2 count 5 source 10.10.10.1
Answer: A
NEW QUESTION # 40
Which two fields of a hello packet must match on both routers when forming an OSPF adjacency? (Choose two.)
- A. Hello interval
- B. Router priority
- C. Network mask
- D. Designated route
Answer: A,C
NEW QUESTION # 41
Which statement is true about GRE encapsulation?
- A. Only the IP header is encapsulated by GRE.
- B. The entire packet is encapsulated by GRE.
- C. The entire frame is encapsulated by GRE.
- D. Only the IP payload is encapsulated by GRE.
Answer: A
NEW QUESTION # 42
By default, which RSVP reservation style is used by the Junos OS?
- A. fixed explicit
- B. shared explicit
- C. fixed filter
- D. wildcard filter
Answer: C
NEW QUESTION # 43
You notice that a route from internal BGP peer 192.168.1.1 is missing from the local route table.Which two commands would be used to help identify the source of the problem? (Choose two.)
- A. show route receive-protocol bgp 192.168.1.1
- B. show route protocol bgp hidden
- C. show route advertising-protocol bgp 192.168.1.1
- D. show route bgp
Answer: A,B
NEW QUESTION # 44
Which two statements are true when configuring OSPF authentication? (Choose two.)
- A. If the MD5 password negotiation fails, you can configure OSPF to automatically use a simple password as a backup.
- B. You can configure multiple MD5 passwords simultaneously on the same link.
- C. An MD5 password requires a key ID.
- D. An OSPF link can support both simple password and MD5 authentication at the same time.
Answer: B,C
NEW QUESTION # 45
Exhibit
Which two statements are correct about the service provider MPLS network shown in the exhibit? (Choose two.)
- A. R3 is considered a P router.
- B. R3 is considered an ingress router.
- C. R3 is considered a transit router.
- D. R3 is considered a PE router.
Answer: A,D
NEW QUESTION # 46
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Interface ge-3/0/0.0 has a default metric of 10
- B. Interface xe-0/0/0.0 has a default metric of 10
- C. Interface ge-1/0/0.0 can only form a single adjacency
- D. Interface xe-0/0/0.0 can only form a single adjacency
Answer: C
NEW QUESTION # 47
Click the Exhibit button. Given the OSPF topology shown in the exhibit, how many unique link-state databases are present in the network?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 48
Click the Exhibit.
Referring to the exhibit, the GRE tunnel between R-1 and R2 allows connectivity between User-1 and Server-1. User-1 can communicate with Server-1 with packets that are up to 1448 bytes in size.
However, if the packet size is larger than 1448, User-1 cannot communicate with Server-1.
In this scenario, how do you solve the communication problem?
- A. Apply the allow-fragmentation statement to the GRE tunnel configuration.
- B. Apply the path-mtu-discovery statement to the GRE tunnel configuration.
- C. Change the physical MTU on the gr-0/0/0 interfaces on R-1 and R-2 to 1448 bytes.
- D. Change the physical MTU on the ge-0/0/3 interfaces on R-1 and R-2 to 1448 bytes.
Answer: A
NEW QUESTION # 49
Click the Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The last node in the path will not pop the MPLS label.
- B. The LSP is protected with fast reroute.
- C. The LSP is protected with link protection.
- D. The last node in the path will pop the MPLS label.
Answer: C,D
NEW QUESTION # 50
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. Prefixes in Level 1 will be redistributed to Level 2.
- B. Prefixes in Level 2 will be redistributed to Level 1.
- C. Prefixes In Level 2 will be not redistributed to Level 1.
- D. Prefixes in Level 1 will not be redistributed to Level 2.
Answer: A,C
NEW QUESTION # 51
You want the R1 and R3 routers to forward traffic destined to the 203.0.113.0/24 network through R2. Which BGP attribute would you modify to satisfy this requirement?
- A. origin
- B. local preference
- C. community
- D. MED
Answer: D
NEW QUESTION # 52
Referring to the exhibit, what will happen to untagged frames?
- A. The untagged frames are associated with VLAN 10.
- B. The untagged frames are associated with VLAN 20.
- C. The untagged frames are dropped.
- D. The untagged frames are load balanced between VLAN 10 and VLAN 20.
Answer: C
NEW QUESTION # 53
......
The JN0-363 exam is a comprehensive assessment of your skills and knowledge related to Service Provider Routing and Switching. Its content covers fundamental concepts of Service Provider Network, such as Layer 2 VPNs, Layer 3 VPNs, Multiprotocol Label Switching (MPLS), BGP, and OSPF protocols, among others. It also tests your abilities to configure, monitor, troubleshoot, and optimize these network services.
JN0-363 Dumps Ensure Your Passing: https://www.prep4king.com/JN0-363-exam-prep-material.html
Valid JN0-363 Test Answers & JN0-363 Exam PDF: https://drive.google.com/open?id=1Ie8iZifqdhrhR1mVnzc827ZSxKATiRE_
