(2023) 2V0-41.20 Exam Dumps, Practice Test Questions BUNDLE PACK
VCP-NV Certification 2V0-41.20 Sample Questions Reliable
NEW QUESTION # 36
A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. A NSX-T Data Center administrator used the get logical-routers command to retrieve this information:
Which two commands must be executed to check BGP neighbor status? (Choose two.)
- A. sa-nsxedge-01(tier1_sr)> get bgp neighbor
- B. vrf 1
- C. sa-nsxedge-01(tier0_sr)> get bgp neighbor
- D. sa-nsxedge-01(tier0_dr)> get bgp neighbor
- E. vrf 4
- F. vrf 3
Answer: C,F
NEW QUESTION # 37
Refer to the exhibit.
Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?
- A. SNAT
- B. DNAT
- C. Reverse NAT
- D. 1:1 NAT
Answer: A
NEW QUESTION # 38
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?
- A. set service nsx-manager logging-level debug
- B. set service manager log-level debug
- C. set service manager logging-level debug
- D. set service nsx-manager log-level debug
Answer: C
Explanation:
Reference:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html
NEW QUESTION # 39
Which two choices are prerequisites to configure NSX-T on VDS? (Choose two.)
- A. vSphere Distributed Switch 6.5
- B. vSphere Distributed Switch 7.0
- C. MTU 1500
- D. MTU 1600
- E. MTU 1400
Answer: B,D
Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-BA34FB2A-6780-41C5-B895-F37E5A7B7BAE.html
NEW QUESTION # 40
When running nsxcli on an ESXi host, which command will show the Replication mode?
- A. get logical-switches
- B. get logical-switch <Logical-Switch-UUID>
- C. get logical-switch <Local-Switch-UUID> status
- D. get logical-switch status
Answer: B
Explanation:
Reference:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html#get%20logical-switch%20%3Clogical-switch-id%3E%202
NEW QUESTION # 41
A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. A NSX-T Data Center administrator used the get logical-routers command to retrieve this information:
Which two commands must be executed to check BGP neighbor status? (Choose two.)
- A. sa-nsxedge-01(tier1_sr)> get bgp neighbor
- B. vrf 1
- C. sa-nsxedge-01(tier0_sr)> get bgp neighbor
- D. sa-nsxedge-01(tier0_dr)> get bgp neighbor
- E. vrf 4
- F. vrf 3
Answer: C,F
NEW QUESTION # 42
Which NSX CLI command is used to check the GENEVE tunnel status on ESXi transport node?
- A. get host-switch <Host-Switch-Name> tunnel status
- B. get host-switch <Host-Switch-Name> tunnels
- C. get transport-node tunnel state
- D. get transport-node tunnel status
Answer: B
Explanation:
Reference:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html#get%20host-switch%20%3Chost-switch-name%3E%20tunnels
NEW QUESTION # 43
A DevOps user has deployed a Kubernetes Pod in vSphere.
What does the term ClusterIP represent within NSX-T?
- A. Deployment of T1 with NLB service.
- B. Deployment of T0 and T1
- C. Deployment of Distributed Router.
- D. Deployment of Distributed Load Balancing service.
Answer: D
NEW QUESTION # 44
Which CLI command is used to start the NSX Manager virtual machine in the KVM environment?
- A. virsh poweron <nsx-manager-name>
- B. virsh start <NSX-Manager-ID>
- C. virsh start <NSX-Manager-Name>
- D. virsh poweron <nsx-manager-ID>
Answer: C
NEW QUESTION # 45
Which command is used to change the NSX CU administrator password?
- A. set user administrator password <password> old-password <old-password>
- B. set user administrator password <old-password> <new-password>
- C. set user admin password <old-password> <new-password>
- D. set user admin password <password> old-password <old-password>
Answer: D
Explanation:
To change the password of an account run: set user admin password my-new-pwd old-password my-old-pwd
NEW QUESTION # 46
Which is correct when deploying a NSX Edge in a KVM only environment?
- A. deploy NSX Edge VM with QCOW2 image
- B. deploy NSX Edge on a bare-metal server
- C. deploy NSX Edge VM with OVF template
- D. deploy NSX Edge VM with ISO image
Answer: B
NEW QUESTION # 47
What are three characteristics of a transport zone? (Choose three.)
- A. optional for creating a segment
- B. configured with a Single N-VDS
- C. defines the potential reach of transport nodes
- D. defines the scope and reachability of a Segment
- E. configured with multiple N-VDS
Answer: B,C,D
Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/2.3/com.vmware.nsxt.install.doc/GUID-F47989B2-2B9D-4214-B3BA-5DDF66A1B0E6.html
NEW QUESTION # 48
Which three steps must be carried out to configure North-South / East-West Network Inspection? (Choose three.)
- A. Service Consumption
- B. Service Insertion
- C. Service Registration
- D. Service Deployment
- E. Service Introspection
Answer: B,D,E
NEW QUESTION # 49
Which three services are compatible with VRF Lite? (Choose three.)
- A. NAT
- B. DHCP
- C. Load Balancer
- D. VPN
- E. Intrusion Detection
Answer: A,B,E
Explanation:
VRF Lite is not compatible with the following services:
-VPN
-Load Balancer
Taken from NSX-T ICM 3.0 Lecture Manual.
NEW QUESTION # 50
An NSX administrator is configuring the KVM hypervisor host as a transport node and wants to apply the Failover Order as a NIC teaming policy.
Which profile allows the administrator to configure the NIC Teaming policy as Failover Order?
- A. Host Switch Profile
- B. Transport Node Profile
- C. Uplink Profile
- D. N-VDS/VDS Profile
Answer: C
NEW QUESTION # 51
Which two tools are used to configure centralized logging in NSX-T Data Center? (Choose two.)
- A. vRealize Network Insight
- B. vRealize Operations
- C. Syslog Server
- D. vRealize Log Insight
- E. vRealize Automation
Answer: C,D
NEW QUESTION # 52
What are two types of supported IPSec VPNs in NSX-T Data Center? (Choose two.)
- A. route-based IPSec VPN
- B. Layer-7 based IPSec VPN
- C. policy-based IPSec VPN
- D. Open source based IPSec VPN
- E. SSL based IPSec VPN
Answer: A,C
NEW QUESTION # 53
A customer is preparing to deploy VMware Kubernetes on an NSX-T Data Center.
What is the minimum MTU size for the UPLINK profile?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 54
Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the GENEVE protocol on the ESXi transport node? (Choose two.)
- A. esxcli network ip interface ipv4 get
- B. esxcli network nic list
- C. esxcfg-nics -1
- D. net-dvs
- E. esxcfg-vmknic -1
Answer: A,E
NEW QUESTION # 55
An NSX administrator has configured a load balancer virtual server on a Tier-1 Gateway.
In order to advertise the load balancer virtual IP to the Tier-0 Gateway, which route advertisement configuration has to be done on the Tier-1 Gateway? (Choose two.)
- A. Advertise All LB SNAT IP Routes
- B. Information
- C. Advertise All LB VIP Routes
- D. All Static Routes
- E. Advertise All NAT Routes
Answer: A,C
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EEBA627A-0860-477A-95
NEW QUESTION # 56
An NSX administrator has configured a KVM hypervisor as a transport node. Which kernel module on KVM implements a N-VDS?
- A. dyswitch
- B. etherswitch
- C. nsx-vswitch
- D. openvswitch
Answer: D
NEW QUESTION # 57
Which statement is true about an alarm in a Suppressed state?
- A. An alarm can be suppressed for a specific duration in minutes.
- B. An alarm can be suppressed for a specific duration in seconds.
- C. An alarm can be suppressed for a specific duration in hours.
- D. An alarm can be suppressed for a specific duration in days.
Answer: C
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-Intelligence/1.1/user-guide/GUID-EBD3C5A8-F9AB-4A22-BA40-9
"If you move an alarm into a Suppressed state, you are prompted to specify the duration in hours. After the specified duration passes, the alarm state reverts to Open. However, if the system determines the condition has been corrected, the alarm state changes to Resolved."
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EB1BB1D3-8892-4890-BE
NEW QUESTION # 58
......
Prepare for the Actual VCP-NV 2V0-41.20 Exam Practice Materials Collection: https://www.prep4king.com/2V0-41.20-exam-prep-material.html
VCP-NV Certified Official Practice Test 2V0-41.20: https://drive.google.com/open?id=1rCd4op0aSjUoJg8g_ulNMX60i9aKlS3A
